V6 Engine Change Ignition Coils Specs Specifications

2001-2006 Chrysler Sebring Specifications

Look up Chrysler Sebring specification, engine oil capacity, spark plug gap, safety rating, fuel consumption, transmission, and light bulb sizes.

Engine 2.5L 6-Cylinder SOHC

  • Recommended oil viscosity: 5W-30
  • Oil certification: API
  • Drain plug torque: 29 ft-lbs
  • Oil capacity: 4.5 quarts

Spark Plug Gap

  • 2.5L 6-Cylinder: 0.044’’

Fuel

  • Capacity
    • 2.4 Liter Engine (87 Octane): 16 Gal (61 Liters)
    • 2.7 Liter Engine (87 Octane): 16 Gal (61 Liters)

Coolant

  • Type: Mopar Antifreeze/Coolant 5 Year/ 100,000 Mile Formula
  • Capacity:
    • 2.4 Liter Engines: 8 qts. (7.5 Liters)
    • 2.7 Liter Engines: 9.5 qts. (9.0 Liters)

Automatic Transmission Fluid

  • Type: Mopar ATF+4 Automatic Transmission Fluid.

Brake Master Cylinder

  • Type: Mopar DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.

Power Steering Fluid

  • Type: Mopar Power Steering Fluid + 4, ATF+4 Automatic Transmission Fluid

Steering Gear & Linkage, Ball Joints, Prop Shafts & Yokes, Wheel Bearings

  • Type: Mopar Multi-Purpose Lubricant NLGI Grade 2.

Powertrain

Engine 

Coupe

  • 2.0 L 420A I4 (gasoline)
  • 2.5 L 6G73 V6 (gasoline)

Convertible

  • 2.4 L EDZ I4 (gasoline)
  • 2.4 L EDV/EDT I4 (t/c gasoline)
  • 2.5 L 6G73 V6 (gasoline)

Transmission

  • 5-speed manual
  • 4-speed 41TE automatic

Fuel Consumption

pUWp MmhcDfHCwcta8y0h2p4SfjWvBosu1W0H6ezj93p8l4A1pM8Cx9DtwMy V2Aar7SFgeC

Safety Ratings

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *