V6 Engine Change Ignition Coils Specs Specifications

2005-2010 Chrysler 300 Specifications

Look up Chrysler 300 specification, engine oil capacity, spark plug gap, safety rating, fuel consumption, transmission, and light bulb sizes.

Engine 2.7L 6-Cylinder DOHC

  • Recommended oil viscosity: 5W-20
  • Oil certification: API
  • Drain plug torque: 20 ft-lbs
  • Oil capacity: 6.0 quarts

Spark Plug Gap

  • 2.7L 6-Cylinder:0.050”

Engine 3.5L 6-Cylinder SOHC

  • Recommended oil viscosity: 5W-20
  • Oil certification: API
  • Drain plug torque: 20 ft-lbs
  • Oil capacity: 6.0 quarts

Spark Plug Gap

  • 3.5L 6-Cylinder: 0.052”

Engine 5.7L 8-Cylinder

  • Recommended oil viscosity: 5W-20
  • Oil certification: API
  • Drain plug torque: 20 ft-lbs
  • Oil capacity: 7.0 quarts

Spark Plug Gap

  • 5.7L 8-Cylinder : 0.040”

Engine 6.1L 8-Cylinder

  • Recommended oil viscosity: 5W-40
  • Oil certification: API
  • Drain plug torque: 20 ft-lbs
  • Oil capacity: 7.0 quarts

Spark Plug Gap

  • 6.1L 8-Cylinder : 0.052”

Fuel

  • 2.7 Liter Engine: 18 Gallons (68 Liters)
  • 3.5 Liter Engine without All-Wheel Drive:18 Gallons (68 Liters)
  • 3.5 Liter Engine with All Wheel Drive:19 Gallons (72 Liters)

Coolant

  • Capacity: 
    • 2.7 Liter Engine:9.9 Quarts (9.4 Liters)
    • 5.7 Liter Engine:19 Gallons (72 Liters)
    • 3.5 Liter Engine without All-Wheel Drive: 11.1 Quarts (10.5 Liters)
    • 3.5 Liter Engine with All Wheel Drive: 11.4 Quarts (10.8 Liters)
    • 5.7 Liter Engine without Severe Duty II Cooling System:14.7 Quarts (13.9 Liters)
    • 5.7 Liter Engine with Severe Duty II Cooling System:15.1 Quarts (14.3 Liters)

Automatic Transmission

  • Type: MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product.

Brake Master Cylinder

  • Type: MOPAR DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 brake fluid is unavailable, then DOT 4 is acceptable. Use only recommended brake fluids.

Power Steering Reservoir

  • Type: MOPAR Power Steering Fluid + 4, MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product.

Front Axle

  • Type: API GL-5 SAE 75W90 Synthetic Gear Lubricant or equivalent.

Rear Axle

  • Type: API GL-5 SAE 75W140 Synthetic Gear Lubricant or equivalent.

Transfer Case

  • Type: MOPAR Transfer Case Lubricant for BorgWarner 44–40 or equivalent.

Powertrain

Engine

  • 2.7 L EER V6
  • 3.5 L EGG V6
  • 5.7 L EZB Hemi V8
  • 6.1 L ESF Hemi V8
  • 3.0 L OM642 turbodiesel V6

Transmission

  • 4-speed 42RLE automatic
  • 5-speed W5A580 automatic

Fuel Consumption

CHRYSLER 300 FUEL CONSUMPTION 2010

Safety Ratings

CHRYSLER SAFETY RATINGS  

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *