V6 Engine Change Ignition Coils Specs Specifications

2006-2012 Toyota Rav4 Specifications

Look up Toyota RAV4, engine oil capacity, spark plug gap, safety rating, fuel consumption, transmission, and light bulb sizes.


  • Type: XA30

Engine 2.5L 4-Cylinder DOHC

  • Recommended Oil viscosity: 0W-20
  • Recommended Engine Oil: API
  • Drain Plug Torque: 30FT-LBS
  • Oil capacity: 4.6 qt

Engine 3.5L 6-Cylinder DOHC

  • Recommended Oil viscosity: 5W-30
  • Recommended Engine Oil: API
  • Drain Plug Torque: 30FT-LBS
  • Oil capacity: 6.4 qt

Spark Plug Gap

  • 3.5L 6-Cylinder: 0.044”


  • Capacity:  60 L (15.9 gal., 13.2 Imp.gal.)

Cooling System


  • “Toyota Super Long Life Coolant”
  • Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. Do not use plain water alone
  • Capacity:
    • Gasoline engine 3ZR-FE and 3ZR-FAE engines:
      • With a Multidrive: 6.0 L (6.3 qt., 5.3 Imp.qt.)​​​​​​
      • With a manual transmission: 5.8 L (6.1 qt., 5.1 Imp.qt.)
    • 2AR-FE engine: 6.8 L (7.2 qt., 6.0 Imp.qt.)
    • Diesel engine
      • Without power heater: 6.9 L (7.3 qt., 6.1 Imp.qt.)
      • With power heater: 7.3 L (7.7 qt., 6.4 Imp.qt.)

Rear Differential (AWD Models)

  • Type: Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent
  • Capacity: 0.5 L (0.5 qt., 0.4 Imp.qt.)

Automatic Transaxle

  • Type: Toyota Genuine ATF Type T- IV
  • Capacity: 
    • Gasoline engine: 6.5 L (6.9 qt., 5.7 Imp.qt.)
    • Diesel engine: 6.7 L (7.1 qt., 5.9 Imp.qt.)


  • Type: Toyota Genuine CVT Fluid TC or FE
  • Capacity: 8.9 L (9.4 qt., 7.8 Imp.qt.)

Manual Transaxle

  • Type: 6
    • Use either of the following:
      • “TOYOTA Genuine Manual Transmission Gear Oil LV”
      • Other gear oil that meets API GL-4 and SAE 75W specification
  • Capacity: 8.9 L (9.4 qt., 7.8 Imp.qt.)


  • Type: SAE J1703 or FMVSS No. 116 DOT 3


  • Type: Automatic transmission fluid DEXRON II or III

Fuel Consumption


Safety Ratings



  • Rushit Hila • ASE Certified

    Rushit Hila, an ASE-certified engineer (G1 Automotive Maintenance and Repair), brings over two decades of hands-on experience in the automotive world to his writing. With a strong educational background, including a Master of Science in Engineering and a Bachelor of Science in Engineering, he has honed his skills and expertise through years of practical work. As a respected authority in the field, Mr. Hila is dedicated to offering insightful and valuable content that resonates with both vehicle owners and mechanics.

Leave a Reply

Your email address will not be published. Required fields are marked *