How to Add Windshield Washer Fluid Mitsubishi Mirage

DIY Cost: $ 3 - 10
Est. Time: 5 mins
Difficulty: Very Easy

This guide provides instructions on how to add windshield washer fluid to a Mitsubishi Mirage G4. 

What you will need

Procedure

  1. Open the hood. Unlock the vehicle and pull the hood release under the dashboard. Then go in front of the car and unlock the hood latch under the hood. Once the hood latch is unlocked, pull up the hood and use the hood lift support to hold up the hood.Opened hood of the Mitsubishi Mirage.
  2. Find the windshield washer tank located at the passenger side of the engine compartment. It has a white cap and windshield washer symbol on top.Windshield washer tank of the Mitsubishi Mirage G4.
  3. Open the cap and pour the windshield washer fluid in.   How to open the cap of the windshield washer tank of a Mitsubishi Mirage.

    Open the tank by pulling the cap up.

  4. Close the cap and make sure to test the system to make sure it worked when you needed it.

    Closing the cap of the windshield washing tank of a Mitsubishi Mirage.

    To close the windshield washer tank, push the cap back to the tank. You will hear a snap sound once the lid is sealed.


Was this helpful?
We would love to hear from you. Send us tips on how to improve this article.
Send us message if you have any car questions.

Tip!
Check out more guides for the following vehicle.

Notes

How to Add Windshield Washer Fluid Mitsubishi Mirage What you will need Windshield washer fluid Procedure Open the hood. Unlock the vehicle and pull the hood release under the dashboard. Then go in front of the car and unlock the hood latch under the hood.