How to Add Windshield Washing Fluid on a Mercedes-Benz GLA-Class

DIY Cost: $ 5 - 8
Est. Time: 5 mins
Difficulty: Very Easy
This guide provides instructions on how to add windshield washing fluid to a Mercedes Benz GLA Class.

What you will need


  1. Open the hood of your car. Go to the driver's seat and pull the hood release below the hood glaThen go in front of your vehicle, unlock the hood latch and pull the hood hood Use the supporting rod to support the hood open.


  2. Locate the windshield washing tank. You can find the windshield washing tank on the driver's side of the engine compartment, you can also see that it has a blue cover that has a washing symbol on it. windshield washing tank location


  3. Lift up the cover of the windshield washing tank by pulling it up. Make sure to use a windshield washer fluid that is designed for the climate you  live in. Open windshield washing tank


  4. Pour the washing liquid into the windshield washing tank. The tank can accommodate three-quarters to a gallon of windshield washer fluid this is equivalent to 2.5 and 4 liters of fluid. Put the cover back when you are done adding the liquid in.closed washing windshield cover


Was this helpful?
We would love to hear from you. Send us tips on how to improve this article.
Send us message if you have any car questions.

Check out more guides for the following vehicle.


How to Add Windshield Washing Fluid on a Mercedes-Benz GLA-Class What you will need Windshield Washer Fluid Procedure Open the hood of your car.