If your vehicle was involved in an accident and the airbags deployed, the airbag module will need to be replaced or repaired. Hard codes stored in airbag modules typically cannot be cleared even with professional airbag scanners. Your options are to have the dealer replace the airbag module, which typically costs between $650-$900 or have a third party repair your existing airbag module.
Service can be purchased via eBay. If you are looking for a company that will reset or repair your original airbag module, provide fast turnaround and not bankrupt you then Auto Tronix is definitively one of the best choices. We have personally used their service and have been very satisfied with their communication and speed. AutoTronix sent the module back quickly. They made sure that everything worked properly after installation. Replied to emails quickly. They were always happy to answer our never-ending questions. It costs less than $100 USD to reset most SRS airbag modules. They cover almost all car makes and models.
Ship your existing airbag module to AutoTronix located in Spartanburg, SC 29303. They will repair and reset airbag module, SRS, RCM, SDM and any restraint system codes. If you have any questions call them at 864-804-0525 they are great at answering questions.
One of the largest companies that perform airbag module repair service. Located in Duluth, GA. They provide fast airbag module reset, 24-hour turnaround for any make and model. MyAirbags also performs Speedometer, Cluster, ABS, EBCM, ECU repairs. This service can also be purchased via eBay.
Provides service to reset your OEM SRS airbag module. They will reset all crash data and hard codes. Once the reset is performed you will be able to reuse your airbag module again instead of having to buy an airbag control unit. They promise 100% money back guarantee, 24-hour turnaround and are located in Westfield, MA 01085.
Any of these SRS/airbag repair services can reset your airbag module, clear any crash codes & data stored and restore your airbag computer module to OEM factory settings.All services listed here will reset your airbag module and restore it back to its factory condition. You will not need to do any additional programming.
The companies listed here offer SRS / Airbag restraint control system repair of your existing airbag unit. Meaning you mail your airbag module, they repair and reset it to original factory setting, clear all the codes and send it back. This is necessary when your airbag light stays on after an accident.
Meaning there are hard codes stored in the airbag module. If you had no accidents but you have the airbag light on, an airbag repair service will not fix your problem. Instead, you will need to read the fault codes yourself to find the cause of the airbag light.
Some common problems are the passenger occupancy sensor being defective, the clock spring or the seat belt buckle micro-switch going bad. Use an OBD-II scanner that can read airbag codes.These airbag reset tools will read and erase codes related to the airbag light. A couple of highly rated airbag reset tools being sold on Amazon are the Autel MD802 or Launch Creader VII .
If your car has been in an accident, the Airbag or SRS light on your car will stay on or flash continually. The airbag computer module needs to be repaired or reset in order to be used again.
Resetting the Airbag Module Reset vs. New Airbag Unit
When you use an airbag module repair service you can avoid a trip to the dealer for coding. Getting the airbag module reset is less expensive fix than going to the dealer and installing a new airbag module.
Most car dealers will not perform airbag module reset or repair. They are happy to sell you a new airbag module and charge you for programming. This ends up costing hundreds or even thousands of dollars, especially on luxury car models. When you perform a reset of the original airbag module, you existing airbag module ECU is restored to OEM factory settings.
You don't even need to program it or see the dealer after you install it back on your car. This is one of the main advantages of using an airbag module repair service. Once your airbag unit is reset it will be as good as new. Your airbag light should turn off unless there is a problem with any of the airbag components such as passenger seat sensor, clock spring, deployed airbag etc.
An airbag module is a computer installed in all cars equipped with airbags. Multiple sensors including seat belts, airbags, impact sensors clockspring send data to the airbag module. In case of an accident, the airbag module writes crash data and stores it in its internal memory chip. Airbags may or many not deploy along with the seat belts tensioners.
If you had an accident, the airbag light goes off and the airbag module is considered useless. Don't rush to purchase a new airbag module from a dealer. The following companies will reset your existing module for less than $100.
The airbag module reset companies are able to reset hard codes and soft codes. In other words, make your airbag module Virgin and restore it original factory settings. The dealer can reset soft codes, but their scan tools will not be able to clear hard code due to hardware limitations.
After you receive the module from an airbag module repair service you will not need to take the car to the dealer for any programming. Typically all computer control modules can be reset, except if the airbag control module has physical damage such as from flood or fire damaged.
Note that late model cars will have partial VIN stored in the airbag control module.