How to Check Brake Fluid Level on Mercedes-Benz GLA

DIY Cost: $ 80 - 120
Est. Time: 10 mins
Difficulty: Easy
This guide provides instructions on how to check and add the Brake Fluid on the Mercedes Benz GLA Class.

What you will need

Procedure

  1. Open the hood. open hoodIn order to open the hood, you need to go to the driver's seat and pull the hood release lever below the dashboard.OPen GLA hoodThen go in front of your vehicle and release the hood latch. Pull up the hood and use the support rod to put the hood up.open hood

     

  2. Locate the brake fluid reservoir. You can find the brake fluid reservoir behind the engine compartment at the driver's side. It has a black cover or lid.brake fluid

     

  3. Check the oil level. You will notice that there is a min and max written in the reservoir tank of the brake fluid.min/max brake fluid

     

  4. Add brake fluid. If the brake fluid is at the minimum level, remove the cap in the brake fluid reservoir and add the brake fluid recommended by the vehicle manufacturer.
  5. Put the cap back when you are finish filling in the brake fluid, inspect the level again to ensure that there is enough brake fluid in the reservoir.Brake fluid

     


Was this helpful?
We would love to hear from you. Send us tips on how to improve this article.
Send us message if you have any car questions.

Tip!
Check out more guides for the following vehicle.

Comments

How to Check Brake Fluid Level on Mercedes-Benz GLA What you will need Brake Fluid DOT 4+ Procedure Open the hood.