Easy Ways to Check for a Blown Fuse

checking for blown fuse

Finding blown fuses and replacing them yourself is very easy. Learn the easy ways to check a blown fuse by following the procedures below.  This guide provides instructions on how to check for a blown fuse on a car.

checking for blown fuse

What you will need

Bestseller No. 1
  • Fuse Puller

Procedure

  1. Turn off the ignition and disconnect the negative battery terminal.

    disconnect battery to check fuses

  2. Locate the fuse panels. Most cars have two to three fuse boxes. The main fuse box is typically in the engine bay.locating fuse panel
    Your vehicle will also have an interior fuse panel under the dash or on the side of the dashboard.
    interior fuse panel
    It may also be behind the glove box, the rear seat, or the trunk. interior fuse panel
  3. Remove each fuse and inspect it to determine if the fuse is blown. A blown fuse will have a broken wire in the middle and most likely will be black. Checking the fuse
    Left – Good Fuse
    Right– Blown Fuse
  4. If you are looking for a specific fuse, look at the fuse chart and identify the location of the system in question.checking the fuse type
    The fuse chart is usually printed on the back of the fuse box cover, it may be a letter inserted in the fuse box, or some car manufacturers will include the fuse chart in the owner’s manual.
  5. Replace the bad fuse. Once you identify the bad fuse, you need to replace it. Always replace fuses with the same ampere rating. The ampere rating is printed on the fuse and shown in the fuse chart. Don’t install a fuse that has a higher ampere rating. This can damage electronic components in your vehicle and possibly even fire in some cases. replacing the blown fuse

We hope you find the Easy Ways to Check for a Blown Fuse guide helpful. Check these troubleshooting and repair guides for more help on your vehicle.

Similar Posts