If you own a BMW, you probably heard about the Autophix ES910 scanner. We recently were able to test Autophix ES910 scanner on a BMW. Based on our experience this is a powerful OBD2 scanner for BMW at a reasonable price. Not only does it provide special functions such as resetting control units and adaptation values, but it can read and clear codes from 72 BMW control units. It is a multi-system BMW scanner capable of reading and clearing codes from multiple systems including engine, CBS, battery management, EPD etc. Owner's manual doesn't mention all the systems that this scanner can troubleshoot. The Autophix ES910 is an alternative to Carly for BMW or Foxwell NT510 for BMW.
Where to buy AutoPhix ES-910
Autophix ES910 car read and clear codes from systems such as Car Access, Digital Engine Electronics, EGS Transmission Control Unit, GWS - gear selector, VTG - transfer case, EKPS - fuel pump and ACC - Active Cruise Control to name a few. The documentation that comes with ES-910, unfortunately, does not provide any information on the systems you can diagnose, but the ES910 is capable of reading, clearing codes from up to 72 BMW control units.
Allows you to access the DME (Motor Electronics) / DDE (Motor Diesel Electronics) control unit. You can clear adaptations, reset Valvetronic, display live data from oxygen sensor, engine temperature and more.
On 2002 and newer BMW cars you can't just install a new battery. BMW requires that the new battery needs to be registered. The Autophix ES-910 allows you to register a new battery. Taking your car to the shop to register the battery one time will cost you as much as this scanner does. If you need help follow these instructions on how to replace a BMW battery then follow this guide on how to register a BMW battery.
How to register a battery with Autophix ES910
Battery registration failed on our 2006 BMW 5-Series.
Autophix ES-910 is capable of resetting, correcting, or deleting adaptation values from CBS system. BMW vehicles use what is called Condition Based Service (CBS) which is an intelligent system that monitors fluid levels and condition of spark plugs, brake pads, coolant, diesel particle filter, brake fluids and more.
Allows you to check and adjust the steering angle sensor values when necessary.
Allows you access special ABS and DSC functions such as carry out brake bleeding procedure, check brake lines, DSC control unit, etc.
Enables you to clear all the fault codes including ECU fault codes and codes from 72 BMW control units at once.
The ES910 can access, read, clear codes and show live data from 72 different control units on BMWs. Unfortunately, these are not listed in the Autophix ES-910 owner's manual at the time of this review.
DME, EGS, ABS, SRS, IHKA/IHKR, IKE/IKI/KOMBI, EML, SPM/SM, EWS, ZKE, GR, PDC, SZM, BIT, LSZ/LCM, LEW, RAD, EHC/EDC, BM, AIC, NAV, MFL, VID, SES, MID, SHD, SMF, SPMBT, SPMFT, VTG, CID, EPS, SBSL, SBSR, CVM, SIM, SMB, URS, RDC, VMX, VNC, EKM, DWA, XEN, FHK, GSA, AHK, ADS, CAS, DME, EGS, VTC, HPFI, ACC, ARS, CIM, DSC, EDC, EHC, EMF, RDC, AHL, AHM, AMP, ASK, SZM/BZM, FBZM, CD, CD-GW, SG-FD, SG-FD- GW, FD, CDC, CON, FCON, DWA, FBI, IHKA, FKA, HKL, JBIT, KHI, KOM, LM, DVD-C, NAV , JNAV, PDC, CA, PM/MPM, RLS, SASL, SASR, SBSL, SBSR, SFZ, SSBF, SSFA, SSH, STVL , STVR, SHD, SINE, SMFA, SMBF, SMFAH, SMBFH, SHZH, SVS, SZL, SEC, TEL, TCU, TMBF T, TMBFH, TMFAT, TMFAH, VM, WIM, ZGM, SIM, KBM, SBSL, SBSR, TMFA, TMBF, CID, AL , JBE, MRS/ACSM, FRM, RLS, FZD, CCC-ANT, DDE, CCC-A, EKPS, GWS, VTG, VTC, VTC2, CCC-ASK, AL, EDCSHL, EDCSHR, EDCSVL, EDCSVR, VDM, ACSM, AMPH, AMPT, CA, CCC-BO, CCC-GW, CHAMP-BO, CHAMP-GW, CNAV, DAB, FD, FLA, FRM2, FZD, HUD, IBOC, IHKA, INS TR, JBE2, KHM, KNAV, M-ASK-BO, M-ASK-GW, RFK, RLSS, RSE, SDARS, SINE, ULF-SBX, ULF-SBX-H, VSW, EHC, ULF, IHKR, IHR, M-ASK-NAV, MRS, RAD2-BO, RAD2-GW, SDMRS, DME2, ACC2, ANT, ARS, BZM, CD, CEM, CIM2, LM2 AHL2, LM2, LM2, NVE, NVK, PM, SEC 2, SGM-SIM, SGM-ZGM, VTC2, ZBM, DSC, DSC, ALBBF, ALBFA, CIC, CIC-GW, IHKA2, KGM, SZL2, LDM, LRR, MPM, SMG, TLC, rear axle, ABS /ACS/DSC, AMP, IHKS, IHS, AIRBAG, EWS.
Considering the current price Autophix ES-910 is one of the cheapest multi-system BMW scanners you can buy. It's even cheaper than Carly for BMW when you consider adapter+app cost. It offers many advantages over the basic OBD-2 scanners and can read and clear codes form 72 systems. It provides special functions such as register BMW battery or reset electronic parking brakes. A better choice than generic OBD2 scanners or an ELM327 adapter used with Torque app. Definitively a BMW OBD2 scanner worth considering.