2010-2018 Mazda 5 Battery Replacement DIY

2010-2018 Mazda 5 Battery Replacement DIY

 HUB: Mazda, Mazda 5 2010-2018  
Updated Thursday Aug 24, 2017

In this DIY tutorial, you will learn how to remove and install a new car battery on a Mazda 5. Instructions in this guide will help you replace the battery on Mazda 5 models produced in 2010 2011 2012 2013 2014 2015 2016 2017 2018. Before you get started we recommend that you read the important notes on your owner's manual on how to change a car battery. It is important to have the correct battery size for your Mazda 5. 

What you will need: 

The battery cold cranking amps should be at least 500 A and higher. 

Instructions on how to change car battery on Mazda 5 2010-2018


Step 1: Turn off engine

Before you get started replacing the car battery on your Mazda 5, step one is to turn off the ignition. Mazda can be sensitive to voltage drops and keeping the key in the ignition can cause electrical problems.

2010-2018 Mazda 5 Battery Replacement Instructions 2010 2011 2012 2013 2014 2015 2016 2017 2018 Mazda Mazda5 Mazda 5

Step 2: Open Hood

Open hood. In your Mazda 5 the battery is located under the hood. Pull the hood release to open the hood.

Step 3: Locate Battery

In your Mazda 5 the battery is located in the engine bay. 

open trunk to access battery 2010 2011 2012 2013 2014 2015 2016 2017 2018 Mazda Mazda5 Mazda 5

Step 4: Disconnect negative terminal

Disconnect the negative battery terminal on your Mazda.

Step 5: Disconnect positive terminal

Next, disconnect the positive battery terminal.

Step 6: Identify battery bracket

Remove battery hold down bracket. Here is a close up picture of the battery bracket on your Mazda 5.

How to replace car battery on Mazda 5 2010 2011 2012 2013 2014 2015 2016 2017 2018 Mazda Mazda5 Mazda 5

Step 7: Remove battery

Remove the bracket. Remove the old battery. Install the new battery.

Step 8: Clean Terminals

Clean battery termnails of your Mazda 5 using a termnial brush. This will ensure that you don't have any corrosion issue in the future.

Step 9: Connect new battery

Reconnect battery terminals. First, connect the positive battery cable on your Mazda 5. Lastly, connect the negative terminals. Use fiber washers to prevent corrosion of the battery terminals.

Step 10: Synchronise

Next, start the car. Follow the instructions found in your owner's manual to synchronize windows, sunroof, seats and reset any radio preset stations.

To change the battery on 2010-2018 Mazda 5 you will need a few basic tools, new battery and about 20 minutes. We hope that you found this DIY guide on how to change the battery on Mazda 5 helpful. If you have any tips that may help Mazda 5 owners replace their battery, please use the comments section below to share your experiences.

Comments

Posted by Sarah on Aug 23, 2017 @ 11:26 am

Posted by Jeremy A on Aug 23, 2017 @ 22:10 pm

Add new comment