Locate the hood release underneath the dash. Pull the lever until you hear the hood pop open. Next, you need to release the hood safety latch at the front of the hood.
Locate coolant/antifreze reservoir
Next you need to locate the coolant reservoir (tank) on your car. the location where you add engine coolant is on the driver/passenger side of the engine.
Locate Low / Max Level
Look at the coolant reservoir tank and note the low and high level. If the level is below the minimum mark you will need to add coolant to your.
Remove cap to add coolant
If the fluid level is low we need to remove the cap to add more coolant.
If the fluid level is low we need to remove the cap to add more coolant. Adding engine coolant to car is very easy and straightforward process. Follow the instructions found on this tutorial or your owners manual.