Alfa Romeo OBD-II (OBD2) port can be used to troubleshoot vehicle problems, reset check engine light, find out why your airbag light is on, or even
Alfa Romeo OBD2 Port Location
Alfa Romeo OBD-II (OBD2) port can be used to troubleshoot vehicle problems, reset check engine light, find out why your airbag light is on, or even to install a monitoring device. Finding the OBD2 port on an Alfa Romeo is very easy.
Where is the OBD2 port on an Alfa Romeo?
On most Alfa Romeo vehicles, the OBD2 port is located under the dashboard, on the driver’s side.
Plugin your OBD2 scanner into the OBD2 port under the dashboard, above the brake pedal.
What is the purpose of the OBD2 port on an Alfa Romeo?
Alfa Romeo On-Board Diagnostic II (OBD-II) is used to diagnose vehicle problems. The OBD2 port can diagnose engine, transmission, ABS, Airbag, and other problems. To access these systems, you will need an Alfa Romeo OBD2 Scanner.
I can’t find the OBD2 port on an Alfa Romeo?
First, make sure to look down under the dashboard.
On some Alfa Romeos, the OBD-II is deep under the dashboard, which means you may need to slide under the dash and use a flashlight to locate it.
In some cases, you may notice a small panel. Use a small flathead screwdriver to remove the panel to expose the OBD2 port.
Where is the Alfa Romeo 159/939 OBD2 port located?
The OBD2 port on an Alfa Romeo 159/939 can be found on the driver's side under the dashboard. You have to remove the panel with a screwdriver to see the OBD2 port.
Alfa Romeo Mito OBD2 port location?
Alfa Romeo Mito OBD2 port can be located under the dashboard on the driver's side. There is a compartment which you need to remove to access the OBD2 port. Then you have to remove the cover of the OBD2 to access it.
Alfa Romeo 156 OBD2 port location?
The OBD2 port on an Alfa Romeo 156 is located above the brake pedal.
Where is the OBD2 port on an Alfa Romeo Giulietta?
On some Alfa Romeo Giulietta, the OBD2 port is located under the steering wheel. You have to remove the small cover to expose the OBD2 port.
Where is the OBD2 port on Alfa Romeo Giulia?
The OBD2 port on Alfa Romeo Giulia can be located underneath the steering wheel column.
What is the difference between OBD, OBD2, and OBD-II?
OBD stands for On-board diagnostic system. OBD-II is the correct name, but sometimes it is referred to as OBD2.
OBD-II is found on all 1996 and newer Alfa Romeo vehicles sold in the US. OBD often reres to OBD-I, which can be found on some older Alfa Romeos from 19985 to 1995.
Published on: Wednesday, December 9, 2020.