In this guide, you will find instructions on how to change windshield wiper blades on Cadillac vehicles.

What you will need

Procedure

  1. Park your Cadillac on a level surface, set the parking brakes, and remove the key from the ignition.
  2. Determine which wiper blade you are going to change first. In this case, we are going to change the driver's side wiper. Move the wiper blade up. Do not allow the wiper arm to fall on the windshield.
  3. Use a small flat screwdriver to lift part of the plastic that locks the wiper in place. If your Cadillac wiper does not have this plastic move to the next step.Cadillac windshield wiper blade replacement diy
  4. Rotate the wiper slightly so that you can press the release.change Cadillac squeaky wipes all yr
  5. Press the release tab and pull down on the windshield wiper.Cadillac wiper replacment guide
  6. Grab the new wiper. Be extremely careful so that the wiper arm doesn't fall on your Cadillac glass. If the wiper arm falls on the glass, it can potentially crack the windshield.install new wipers on Cadillac vehicle
  7. Slide the new wiper into the wiper arm until you hear it click. Next, replace the second wiper blade on your Cadillac.Cadillac Wiper Blade Replacement ATS, CTS, XTS, CT6, XT5, Escalade, SRX, DTS, STS, BLS, XLR

This guide applies to Cadillac models such as the ATS, CTS, XTS, CT6, XT5, Escalade, SRX, DTS, STS, BLS, XLR, etc.

 

We hope you found this guide helpful. Please consider showing your support for YOUCANIC by subscribing to our YouTube channel.

Thank you! 

How to Change Cadillac Windshield Wiper blades In this guide, you will find instructions on how to change windshield wiper blades on Cadillac vehicles.