How to Change Front Brake Pads Dodge Caliber

Vehicle: dodge   Caliber
Difficulty: ⚫⚫⚪⚪⚪
DIY Cost: $30-$55
Est. Time: 1 hr

In this guide, you will find instructions on how to replace front brake pads on the Dodge Caliber.

Procedure

  1. With the wheels on the ground, loosen the lug nuts but don't remove them.
  2. Jack up your Dodge Caliber and secure it with jack stands.
  3. Remove the front wheel from your Dodge Caliber.
  4. Use a flathead screwdriver to press in the caliper piston into the caliper.
  5. Use a 14mm socket to remove one of the guide pins.
  6. Fold out the brake caliper and remove the old brake pads and shims.
  7. Install the new brake pads. Apply a small amount of grease where the brake pads slide on the brake caliper. Do not apply brake grease on the brake pad surface or brake rotor.
  8. Install the brake caliper. Apply grease to the guide pins.
  9. Torque guide pins to 31 Nm or 23 ft-lb.
  10. Install the wheel and tighten the lug nuts. Rember to torque the lug nuts when the vehicle has been lowered.
  11. Start your Dodge Caliper and pump the brake pedal a few times before starting to drive.

 

By YOUCANIC Automotive Experts
Jun 2020
How to Change Front Brake Pads Dodge Caliber In this guide, you will find instructions on how to replace front brake pads on the Dodge Caliber.