How to change front turn signal bulb Mazda5 2010-18

How to change front turn signal bulb Mazda5 2010-18

Last Updated on Monday Sep 11, 2017

Learn how to replace the front turn signal light bulb on Mazda 5 made from 2010 through 2018. The instructions are the same for both driver's and passenger's side turn signal light bulb. The turn signal may also be referred to as the blinker. 

What you will need

  • 1157NA Turn Signal Bulb
    • The light bulb type on Mazda 5 is 1157NA bulb. The bulb has two filaments one is 27watt and the second is 8 watt.

How to replace front turn signal Mazda 5 2010-18

 

Step 1

Park your Mazda 5. Turn off the engine and get ready to change the front turn signal light bulb on your 5.

 

Step 2

To change the turn signal on your 5 you need to first open the hood. The hood release is located under the dashboard of your 5.

 

Step 3

Look at the headlight of your Mazda5. Identify the light bulb that needs to be replaced

how to replace turn signal on a Mazda 5 2010 2011 2012 2013 2014 2015 2016 2017 2018
 

Step 4

Access the back of the Mazda5 headlight. In some cases, it may be easier to remove the headlight but for Mazda 5 it is not necessary. 

 

Step 5

Remove the socket by turning it counter clockwise.

 

Step 6

Replace the light bulb.

 

Step 7

Reinstall the turn signal socket into the headlight assembly of your Mazda

If the front turn signal on your Mazda doesn't work after you install a new bulb, check the fuses. The fuse for front turn signal lights in located in the engine compartment fuse box. This is a 10A fuse market as HAZARD. Fuse location is 24.