In this guide, you will find step-by-step instructions on how to change outer tie rods on a Mazda. 

Symptoms

  • Loose steering
  • Noise when hitting bumps (Can also be caused by worn sway bar bushings.)
  • Shaking in the steering wheel
  • Alignment is off
  • The car pulls to the side at highway speed
  • Uneven tire wear

What you will need

  • Outer Tie Rod for Mazda
  • 15mm socket
  • 17mm socket
  • 19mm socket
  • Ratchet
  • Torque Wrench
  • Tie Rod Puller
  • Jack
  • Jack stands

Procedure

  1. Park your Mazda on a flat surface. Place the shifter in park and engage the parking brakes.
  2. Before you raise the Mazda, you need to break loose the lug nuts.remove tire to replace tie rod on Mazda 3 5 7 cx5 cx7 cx9
  3. Next, jack up the car at the jacking points using a floor jack. Support vehicle with jack stands. Never depend on the jack alone.jack up mazda change tie rod
  4. Locate the out tie rod. Here is a picture of the tie rod on a Mazda 5.Mazda outer tie rod replacement guide diy 2010 2011 2012 2013 2014 2015 2016 2017 2018
  5. Remove the cotter pin from the tie rod end. Use a wrench to loosen up the bolt that secures the tie rod. Next, use a marker or chalk to mark the threads on the inner tie rod.Mazda  tie rod replacement diy instructions
  6. Use a tie rod puller or separator to disconnect the tie rod from the knuckle.
  7. Reinstall a new tie rod on your Mazda in reverse order. Torque the nut to 18 ft.lbs.

Do I Need Front Wheel Alignment? 

Once you replace the tie rods you will need to get the front end aligned. You will need to take your car to a wheel alignment shop. If you don't get your wheels aligned, your car will pull to one side and the tires may wear out too soon.

On average you will pay $100 to get the front wheels aligned. You can also get your car aligned at the Mazda dealership for around $120-$145.

Replacement Cost

The cost to change Mazda tie rods can vary from $200 at independent auto mechanics up to $480 at Mazda dealership. This doesn't include the cost of alignment.

The DIY cost to replace Mazda tie rods is under $75 assuming you have a few basic tools. Plus another $80-$120 for wheel alignment.

Frequently Asked Questions

How long do Mazda tie rods last?

In average tie rods last anywhere from 50,000 to 150,000 miles. The exact length depends on your driving habits, roads you drive on and the quality of the tie rod.

What happens when you break a Mazda tie rod?

If your tie rod breaks while you are driving it will be impossible to steer your car. You will lose control and crash. Don't ignore replacing the tie rods if they are defective.

 

We hope you found this guide helpful. Please consider showing your support for YOUCANIC by subscribing to our YouTube channel.

Thank you!