
How to Change Cadillac Windshield Wiper blades
In this guide, you will find instructions on how to change windshield wiper blades on Cadillac vehicles.
In this guide, you will find instructions on how to charge a dead Cadillac battery.
If your Cadillac battery died because you forgot the lights or the radio on, it doesn't mean that you need to replace the battery.
Charging the battery can bring your battery back to normal operation as long as there are no damaged cells.
Smart charger recommended so that the battery doesn't get overcharged.
Park your Cadillac and set the parking brake. Remove the key from the ignition or if you have a proximity key, keep it away from the car.
Locate the battery. Some Cadillac vehicles have a plastic cover on top of the battery. Remove the screws that hold the battery cover in place. Remove the battery cover.
Connect the black clamp to the frame of the vehicle or engine. You can use a strut tower bolt, for example, or any unpainted bolts. Do not connect the black clamp to the positive battery post.
Allow the battery to charge for a few hours. Monitor the vehicle for the first couple of hours and do not leave the vehicle unattended. If the battery overheats during charging, disconnect the charger. We recommend using a Smart Charger to prevent the battery from overcharging.
It can take several hours to fully charge a dead Cadillac battery.
This method will not only bring your Cadillac battery back to life but ensure that the longevity of your battery is not damaged. Yes, you can always jump start your Cadillac with a jump box or another car, but doing so can have an impact on the life of the battery.
When using your alternator to charge a completely discharged battery can trigger low voltage fault codes in various modules. If you have the time, we recommend charging a dead Cadillac battery following the directions below.
By YOUCANIC Automotive Experts Published on: Monday, April 9, 2018. |