Learn how to check the engine oil level and add oil on Mazda 5.

Checking the Mazda5 engine oil level is easy and takes less than five minutes. This guide applies to Mazda 5 model years 2010 2011 2012 2013 2014 2015 2016 2017 2018.

If the level is low, add 5W-30 full synthetic oil, to bring the oil level between the Min and Max marks on the dipstick. 

Procedure

If the engine oil level is low on your Mazda, add oil to bring the oil reading up to the recommended level. Below you will find the instructions on how to add oil to Mazda 5. Watch the video clips for more help.

  1. Park your Mazda 5 on a level surface. This will help you get an accurate reading when you check the engine oil level.

  2. Turn off the engine and wait at least five minutes before you proceed to check the engine oil level on your Mazda 5. This will allow the engine oil to return to the oil pan which is necessary to take an accurate reading. 

    Mazda 5 turn off engine and check engine oil level <
  3. Open Hood. Set the parking brake. Open the hood by pulling the hood release under the dashboard.

  4. Locate the engine oil dipstick at the front of the engine. Remove oil dipstick and wipe it clean.

    open hood to verify motor oil level on 5 2010 2011 2012 2013 2014 2015 2016 2017 2018
  5. Note Low (MIN) oil level mark. Remove the oil dipstick. Wipe the oil off the dipstick. Note both the minimum and maximum marks. Reinsert the dipstick back into the oil dipstick tube. 

    2010-2018 Mazda 5 Check engine oil level, Add motor oil

  6. Read oil level. Pull the dipstick out and check the engine oil level on your Mazda 5. The level needs to be between the min and max mark. If the engine oil level is below the min mark, you need to add engine oil to your Mazda5. Follow instructions as described in the next step. 

  7. Locate the oil filler cap on top of the engine. This is where you add oil to your Mazda 5.

    location of oil filler cap used to add engine oil Mazda 5 2010 2011 2012 2013 2014 2015 2016 2017 2018

  8. Add recommended engine oil. Start by adding about half a quart at the time and check the level again. If the oil level is still under the MIN mark, add more oil. Don't overfill your oil above the MAX/FULL mark. Only add the recommended oil level as stated in your owner's manual. Typically 5W-20 or 5W-30 Synthetic Engine Oil.  

Notes

If the oil light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to a mechanic.

"

We hope you found this guide helpful. Please consider showing your support for YOUCANIC by subscribing to our YouTube channel.

Thank you!