In this article, you will learn how to replace the convertible top module on Chrysler Crossfire. If you are trying to reset the power top control module (AKS) you may need to disconnect the battery and unplugs the convertible top control module.

The steps below show you how to accomplish this and how to replace the convertible top control module (AKS) also known as:

  • AKS Control Unit
  • Convertible Top Control Module
  • PTCM - Power Top Control Module

Instructions

Steps on how to replace the convertible top module (AKS) on Chrysler Crossfire 2004, 2005, 2006, 2007.

  1. Disconnect the negative battery terminal.
  2. Open the trunk of your Chrysler Crossfire.
  3. Locate the Convertible Top Control Module AKS on the left side of the trunk. chrysler crossfire convertible top aks location
  4. Remove the screw that holds the power top control module in place. remove power top control module ptcm chrysler crossfire
  5. Unplug the electrical connectors from the Convertible Top module. disconnect the control module power reset
  6. Install the new Convertible Top Module and reconnect the battery terminal.

We hope you found this guide helpful. Please consider showing your support for YOUCANIC by subscribing to our YouTube channel.

Thank you! 

Visitor
Member since 2020-09

so happy to have acess to this information thank you!

  •  
  •  
  •