Chrysler Dashboard Warning Lights and Symbols

Chrysler Service Engine Soon IndicatorChrysler check engine lightCheck engine light

 

Check Engine Light / Service Engine Soon 

The check engine light, also known as the service engine soon light, comes on when the on-board diagnostic system detects a problem with either the engine, emission system, or transmission. 

A fault code gets stored in the Engine Control Unit (ECU) and can be retrieved with an OBD-II scanner to find out what is wrong with the vehicle. 

Common causes of the check engine light:

  • Loose fuel cap
  • P0420 catalytic converter failure
  • Emission control system failure
  • O2 sensor failure
  • Dirty Mass Air Flow (MAF) sensor

Chrysler  Air Bag Warning Light

Chrysler SRS AIRBAG LIGHT

 Air Bag Warning Light

The airbag light turns on when you first turn on the ignition, but after a quick system check, it turns off if all the airbag components function properly.

If the airbag light stays, it means the airbags have been disabled and may not deploy in case of an accident. 

To troubleshoot the airbag light you will need to read the fault codes with an airbag scanner

Common causes of the air bag warning light:

  • Dead battery
  • Faulty clock spring
  • A damaged passenger weight sensor
Chrysler Engine Temperature Indicator

Engine Temperature Indicator

This is the warning symbol indicating that the engine has overheated. Pullover immediately and shut off the engine. Wait at least 30 minutes or more for the engine to cool down fully. 

Once the engine cools down, check the engine coolant level.

If the engine overheating continues, do not drive. Call an auto mechanic for advice or tow the vehicle to an auto repair shop near you. 

Common causes of the engine temperature indicator:

  • Coolant hose, heater core, or radiator leak
  • Bad thermostat or cooling fans
  • Faulty engine coolant temperature sensor
  • Bad head gasket.
  • Water pump failure
Chrysler Charge system Trouble Indicator

Charge System Trouble/Battery Warning Indicator

The battery warns the driver there is a problem with the charging system. If the battery light comes on, the vehicle may shut off when driving. 

Common causes of the charging system warning indicator:

  • Alternator not charging
  • Broken serpentine belt
  • Bad battery not holding charge
  • Loose battery cable

 

Chrysler  Low Washer Fluid Indicator

Low Washer Fluid Indicator

This light means that the windshield washer fluid is low. Locate and fill the reservoir, the light will go off after filling. If it stays on the fluid sensor may be faulty/malfunctioning.

Chrysler  Low Fuel Indicator

Low Fuel Indicator

This light means that the fuel level is low, and you need to add more fuel. Always try to keep the vehicle filled before the low fuel light comes on. Running a vehicle low on fuel causes the fuel pump to work harder and may lead to premature failure. If this light stays on after filling it may be a faulty/malfunctioning fuel pump float or sending unit, in which case the fuel pump should be replaced.

Common causes of a low fuel indicator:

  • Low fuel
  • Faulty fuel pump float/ sending unit

 

Chrysler Oil Warning Light

Chrysler Oil Warning Light

Oil Warning Light

This light means there is low oil pressure. Pullover immediately and shut off the engine. Wait at least 5 minutes, then check the oil level with the engine off. If the oil level is low, add engine oil to bring the level between the MIN and MAX marks of the dipstick. 

Do not drive the vehicle or keep it running on idle if the oil light stays on. Doing so can lead to serious engine problems. Call an auto mechanic for advice or tow the vehicle to a repair shop nearby. 

Common causes of the low oil warning light:

  • Bad oil pressure sending sensor
  • Failed oil pump
  • Worn piston rings
  • Blocked oil passages
  • Low oil or oil that has turned to sludge from never changing it
Chrysler Brake Trouble Indicators

Brake Light

This light indicates a problem with the brake system. It could be due to low brake fluid level or another issue with the brake system. 

Do not drive with the BRAKE light on. Brakes may not work or function properly. Call an auto mechanic for advice and, if needed, tow the vehicle to the closest auto repair shop. 

Common causes of a brake light:

  • Brake system malfunction
  • Low brake fluid level
  • The parking brake is on (light may illuminate yellow instead of red in this case)
Chrysler  Economy Mode Operation Indicator

Economy Mode Operation Indicator

In economy mode, the vehicle will adjust engine and transmission performance for the best fuel economy. 

For example, engine RPMs don't reach high values, and transmission may shift earlier. These adjustments help keep fuel consumption down. 

 

Chrysler Cruise Control Indicator

Chrysler  Cruise Control Indicator

Cruise Control Indicator

This light means that the cruise control has been enabled. The vehicle will keep a constant speed. Cruise control will turn off if you press the brakes. 

Note that in this case, there is no adaptive cruise control. The vehicle will not keep a safe distance from the vehicle in front. 

Chrysler High Beam Indicator

High Beam Indicator

This light means the high beams are turned on. You should only use this setting if you are the only vehicle on the road. Do not keep the high beams on if you are coming in the opposite direction or other vehicles in front of your vehicle. 

To turn off the high beam, pull the turn switch towards the back of the vehicle. 

 

Chrysler Lane Sense Indicators

 

Chrysler  Lane Keeping Indicator

LaneSense Indicator

This light means that lanesense is enabled. This light should flash if you leave the lane without turning on the blinker. With lanesense on, if a vehicle is drifting over lane markers on the road and there is no correction, the vehicle will correct itself back into the center of the lane.

If the driver of the vehicle turns the steering wheel while lane-keeping is self-correcting it will disengage and the driver will remain in control of the steering. Lane-keeping can also be turned off by pressing the switch on the dash. 

Chrysler Stability Control Indicator

Stability Control Indicator

This light means that the stability control has detected a fault. The vehicle can be driven but keep in mind stability control has had an issue. If this light remains on after a few ignition cycles then a problem likely persists. 

Use an ABS Scanner to read the fault codes from the ABS and traction modules. 

  • Faulty steering angle or wheel speed sensors/contaminated sensors
  • Faulty ABS system
  • Faulty power steering system
  • Engine problems such as misfiring cylinders
Chrysler  Electronic Power Steering Trouble Indicator

 Electronic Power Steering Trouble 

This light means there is a problem with the electronic power steering. The vehicle is still driveable, but it will take greater effort to turn the wheel. It is likely the vehicle needs service if this warning appears. Use an OBDII scan tool capable of scanning the electronic power steering control module (EPSM) to retrieve diagnostic trouble codes.

Chrysler Anti-Lock Brake System Fault Indicator

Anti-Lock Brake System Fault Indicator

This light means that the anti-lock brake system has been disabled. In most cases, the problem is due to a bad ABS wheel speed sensor. While the vehicle can be driven, the anti-lock brake function is disabled, and the vehicle may take longer to bring to a complete stop and may skid under hard braking or if there is rain or snow on the road. 

To find out why your Chrysler ABS light is on, use an ABS scanner to read the fault codes from the ABS Control Module. Generic OBD-II scanner may not be able to read the body module of a Chrysler. 

Common causes of the ABS light:

  • Faulty ABS wheel speed sensor
  • Broken ABS wheel ring
Chrysler Tire Pressure Monitor Indicator

Tire Pressure Monitor Indicator

This light means there is low tire pressure in one of the tires. Check the tire pressure and correct it to bring it to the recommended air pressure, as shown on the sticker on the driver's door frame. 

Common causes of the TPMS light:

  • One or more underinflated tires.
  • A faulty tire pressure monitor system sensor
Chrysler  Turn Signal Indicator

Turn Signal Indicator

This light means the turn signals are on. If both turn signals are flashing, it is because the hazard lights are turned on. Turn off the hazard by pressing the orange triangle on the dashboard. If the turn signal lamp is flashing rapidly it indicates a bad bulb. If the lamp is stuck solid it is usually a bad switch or circuit.

Common turn signal issues:

  • The turn signal switch is faulty. 
  • Burnt out/ bad turn signal bulb
Chrysler Door Ajar

Door Ajar

This light means that one of the doors is open or is not closed completely. Pullover, park the vehicle, and check to ensure all the doors are fully closed. 

Common causes of the door ajar indicator:

  • Worn-out door latches/ strikers
  • Faulty door ajar sensor

Chrysler Hybrid charging Status Indicator

Chrysler  Hybrid Charging Indicator

Hybrid Charging Indicator

This light comes on in hybrid and electric vehicles. The plug light may be red, yellow, or blink white while the battery is being charged. Once the battery is fully charged, the plug light turns green. Remove the charger and the light will turn off. 

Chrysler Park Lamps ON Indicator

Park Lamps ON Indicator

This light means the parking lights have been turned on. Turn the headlight switch to a different position to switch to headlamps or turn the lights off. This will turn the parking lights and the indicator lamp off.

Chrysler  Seat Belt Reminder

Seat Belt Reminder

This light means that the BeltAlert warning sequence has been activated. The warning will have an audible chime. One or more passenger in the vehicle has not fastened their seat belt. For the warning lamp and chime to go off have the passengers buckle their seatbelt. Alternatively, BeltAlert can be deactivated by the dealer.

Common causes of seat belt reminder issues:

  • Faulty seat belt sensor
  • Faulty seat pressure sensor
  • Seatbelt not fastened
Chrysler  Stability Control OFF Indicator

Stability Control OFF Indicator

This light means that stability control has been turned off. Stability control may have been turned off because you pressed the button on the dashboard, or there is a problem with the system. If this lamp stays on after the ignition is in the ON position and the vehicle is running the stability control system is disengaged due to a fault. A professional-grade OBDII scan tool will be needed to read the body diagnostic trouble codes stored.

Common causes of stability control malfunction:

  • Faulty steering angle or wheel speed sensors/contaminated sensors
  • Faulty ABS system
  • Faulty power steering system
  • Engine problems such as misfiring cylinders
Chrysler Trunk Ajar Indicator

Trunk Ajar Indicator

This light means the trunk is still open. Close the trunk securely for this indicator to go off. If it still remains on after shutting properly then there is a fault.

Common causes of trunk ajar indicator:

  • Worn-out trunk latches/ strikers
  • Faulty trunk ajar sensor
Chrysler Security Indicator

Security Indicator

This light means the security system is armed or being armed. While being armed the light will flash fast for fifteen seconds. Once set, the warning will continue to flash every three seconds until disarmed.

Chrysler Electronic Park Brake Trouble Indicator

Electronic Park Brake Trouble Indicator

This light means there is trouble with the electronic parking brake. It will remain on the dash until the parking brake system is serviced. It can be diagnosed with an automotive scan tool

Common causes of electronic parking brake failure:

  • Park brake module failure
  • Improper cable adjustment
  • Worn-out/low park brake shoes
  • Greater electrical/wiring failure
Chrysler Electronic Throttle Control Indicator

Electronic Throttle Control Indicator

This light means a problem with the Electronic Throttle Control (ETC) system has occurred. Pull over when possible and cycle the ignition to reset the throttle. See if the problem still persists. If the light stays on the vehicle will need to be serviced. Have the diagnostic trouble codes read with an OBDII scanner.

Chrysler Speed Warning Indicator

Speed Warning Indicator

This light means a set speed has been exceeded. This warning light can be adjusted to whatever speed the driver sets. It adjusted or turned off in the information display settings. Refer to the owner manual for more information on where to turn it off.

Chrysler Loose Gas Cap Indicator

Loose Gas Cap Indicator

This light means the gas cap was not tightened or has been left off. Check the gas cap to see if it's properly tightened and drive the vehicle an ignition cycle to see if the light goes off. If the gas was overfilled it is also possible it sets this off until the gas has had time to evaporate from the charcoal canister.

Chrysler KeySense Indicator

KeySense Indicator

This light means the key fob is in use. It will remain lit for the entire drive cycle until the engine is turned off. If this light goes off while driving it is an indication the key fob is no longer being detected.

Common causes of a keysense indicator light:

  • The key fob battery is dead.
  • The key fob has been damaged or is faulty.
  • It is also possible the module reading the key fob is faulty, but it is less likely.

Chrysler Forward Collision Alert Indicator

Chrysler Forward Collision Alert Indicators

Forward Collision Alert Indicators

This light means that the forward collision warning is active. Forward collision will try to mitigate any oncoming front end collision by braking and decelerating the vehicle. If there is an exclamation the forward collision system has failed. 

A failing forward collision system may be caused by:

  • Bad forward camera
  • Bad sonar sensor
  • Fault with ABS or brakes

Chrysler Adaptive Cruise Control Indicator

Chrysler Adaptive Cruise Control Indicator

Chrysler Adaptive Cruise Control Indicator

 Adaptive Cruise Control

This light means that adaptive cruise control (ACC) is on. While this is active the vehicle will cruise at a set speed and will slow down if approaching a vehicle in front of it.

If the exclamation point is next to the adaptive cruise control light that means there is a fault and it needs to be serviced. Diagnostic trouble codes can be scanned with an ABS scan tool.

 

Chrysler Master Warning Light

Master Warning Light

The master warning light means there is a common fault happening. Check the dash for a message detailing the problem. This message will appear on the information display every time the ignition is turned on. Fix the problem causing the error for the master warning light to go off. 

Common causes of the master warning light on a Toyota vehicle:

  • No key warning
  • Low windshield-washer fluid warning
  • Parking brake release warning 
  • Door/trunk open warning
  • Loose fuel cap
  • Low tire pressure warning

 

Chrysler Auto Start Stop Indicator

Chrysler Auto Start Stop Indicator

Auto Start-Stop Indicator

This light means the auto start-stop function has had a fault. Have the vehicle scanned with a professional OBDII scan tool. The vehicle will need to be serviced to turn off this warning indicator. If the light came on after a new battery install, it may be the wrong kind of battery causing the problem.

Chrysler Hybrid Ready Indicator

Hybrid Ready Indicator

This light means the hybrid vehicle's system checks have passed. It is ready to drive and will use the hybrid battery power and EV motor as long as this light is active. If the ready light goes off on a hybrid vehicle it may be out of power or unable to drive.

Chrysler Hybrid Service Indicator

Hybrid Service Indicator

This light means the hybrid-electric system needs to be serviced. Have the system scanned with a professional OBDII scan tool to pull the stored hybrid system diagnostic trouble codes. Take the vehicle to a trained hybrid technician to be serviced.

Chrysler Hybrid Power Limitation Indicator

Hybrid Power Limitation Indicator 

This warning illuminates when vehicle acceleration is limited due to a reduction in electric motor performance. This happens when the vehicle's hybrid battery charge is very low. Pullover or get to the nearest charging station. If this light stays on after charging the hybrid vehicle will need to be serviced.

Chrysler Fog Lamp Indicator

Fog Light Indicator

This light means mean the front fog lights are turned on. To turn off the fog lights and indicator, push the headlight switch control knob. 

The purpose of many of these lights on a Chrysler is to inform the driver when a system is enabled. 

A few of these lights indicate a problem or malfunction and inform the driver that that particular system has been disabled.

diagnose Chrysler warning lights

To find out what is wrong with these systems, use an All System Chrysler Scanner to read the fault codes from the corresponding module. 

Note that most OBD-II scanners can only reach check engine codes and are not able to diagnose other systems such as airbags, ABS, traction control, etc. 

Comments

The content of this field is kept private and will not be shown publicly.

Plain text

  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.