In this guide, you will find instructions on how to change front brake pads and rotors on a Hyundai vehicle.
Hyundai Elantra Front Turn Signal Blinker Light Bulb Replacement
In this guide, you will find instructions on how to replace the front turn signal light bulb on Hyundai Elantra 2011-2016, also known as the front blinker.
The owner's manual recommends that you remove the headlight assembly to replace the turn signal light on this generation Hyundai Elantra. While it is difficult it is possible to replace the turn signal light bulb without removing the headlight assembly.
What you will need
- P28 8W light bulb (Amber)
Open Hood. Turn off the engine and place your Hyundai Elantra in Park. Remove the key from the ignition. Pull-on the hood release under the dashboard.
Press the hood latch at the front of the hood up to release the hood.
Remove the turn signal bulb from the back of the headlight. To get to the turn signal socket is a challenge. The owner's manual recommends that you remove the headlight assembly. Before you do that, try to remove the turn signal socket.
The turn signal socket just needs to be turned counterclockwise a little bit and the bulb comes out. It is easy, but a challenge due to space limitations. If you are not able to replace the turn signal bulb on your Hyundai Elantra, you will need to remove the headlight assembly to change the turn signal light bulb.
- Install new turn signal light bulb. Install the new turn signal bulb. Insert the new bulb into the socket. Install the socket in the assembly by aligning the tabs on the socket with the slots in the headlight assembly hole. Press the light bulb and twist it clockwise. It only needs to rotate a little bit to lock in place.
Before you start work on changing the turn signal light bulb on your Hyundai Elantra make sure you have the correct light bulb type. Hyundai Elantra uses a P28 8W light bulb and you can also upgrade to LED type if you prefer.