If your Kia is equipped with gas charged lift / supports, you may need to replace them if your hood no longer stays up. The hood struts wear out over time and need to be replaced. Follow the instruction below to change Kia hood struts yourself. These instructions apply to all Kia vehicles with hood struts including Optima, Sedona, Borrego, Cadenza, Forte, K900, Soul, Sportage.
You can purchase a pair of replacement gas charged lift supports for your Kia on Amazon. Several Kia hood struts sell for under $30, see the link above.
Kia Hood Related Problems
Hood won't stay up
Gas filled hood lift / supports no longer work
Hood falls down after you open it
To fix all these problems you will need to replace the hood lift supports.
How to replace Kia hood strut supports / lift
Step 1 Open hood
Step 2 Remove hood support
Use a flat screwdriver to remove the C clip from the hood support. Have a helper keep the hood in the open / up position as you remove the hood struts. Some models have the ball joint on one side and a bolt on the other. Others may have ball joints on both sides of the hood strut. The Kia Optima in our case had ball joint on both ends of the hood strut.
Step 3 Install new hood support
Install the hood support in reverse order. Make sure the strut is pressed all the way into the ball joint then press the clip in. Watch the following video for further details.
It is recommended that you replace both hood struts at the same time. You may be able to get away with just replacing one hood strut. It is very likely that the other hood lift is going to fail in the near future. This of course applies to vehicles with two hood sturts. Some models have only one hood support.
If you replace the hood lift support yourself you will spend between $30-$45, which is the cost of parts. If you are going to replace the hood struts at a Kia dealer or an auto mechanic you may spend between $100-$150 USD.