Kia Lower Ball Joint Replacement Instructions

Vehicle:   Kia
Difficulty: ⚫⚫⚫⚪⚪
DIY Cost: $30-$140
Est. Time: 1.5 hours

In this step-by-step guide, you will find instructions on how to change lower ball joints on most Kia vehicles.

These instructions and pictures are for 2011-2016 Kia Optima but owners of Kia Cadenza, K900, Soul, Niro, Sportage, Sorento, Sedona, Forte, Rio will also find these instructions helpful.

What you will need

Procedure

Raise vehiclekia forte lower ball joint replacment guide

Park the vehicle and place it in park. Set the parking brakes. Jack up your vehicle and place jack stands under the car. Next, remove the front wheel.

Remove ball joint boltsdiy ball joint kia

Remove the bolts that hold the lower ball joint in place.

Remove nut and bolthow to change ball joint kia optima diy replacement guide

Remove the bolt by the knuckle. This will allow you to lower the ball joint.

Replace ball jointhow to replace ball joint kia rio diy guid

Remove the old ball joint. You may need to use a ball joint fork in order to separate your old ball joint from the knuckle.

Install new ball jointremove replace install new ball joint kia sedona

Install in reverse order and tighten the bolts according to specifications.

An alignment is recommended after ball joints are replaced to ensure good tire wear.

You may consider replacing the lower control arm together with the ball joint. This is an alternative if you have a pressed ball joint type don't want to deal with pressing the ball joint in and out of the control arm.

By YOUCANIC Automotive Experts
Apr 2020

Comments