How to change Low Beam Headlight Light Bulb Replacement Nissan Quest 2011-2017

Low Beam Headlight Light Bulb Replacement Nissan Quest 2011-2017

Last Updated on Thursday Nov 30, 2017

How to change headlight low beam bulb on Nissan Quest. This DIY guide on how to replace the headlight bulb on a Quest applies to models such as Quest. Applicable years: 2011 2012 2013 2014 2015 2016 2017. Wondering what low beam bulb size to use on your Nissan Quest? Look it up below.

What you will need

Nissan Quest use either H11 bulb for the low beam if you have halogen lights. If you have Xenon lights the correct bulb type is D2S. 

Instructions

Step 1

Park your Nissan Quest. Turn off the engine and remove the key. Make sure your Quest lights are turned off.

how to change the light bulb on Nissan Quest

Step 2

Open the hood of your Nissan Quest. The hood release is located under the dashboard of your Quest.

Step 3

Determine the location of the low beam light bulb on Nissan Quest.

Nissan Quest light bulb replacement guide diy

Step 4

Access the back of the Quest headlight. Remove the black plastic cover to access your Quest low beam bulb.

How to replace light bulb on Nissan Quest 2011 2012 2013 2014 2015 2016 2017

Step 5

Remove the low beam light bulb from the headlight of your Quest. Use gloves when handling light bulbs. Twist the bulb counterclockwise to remove it from the headlight. 

Step 6

Install the new low beam light bulb on your Nissan Quest in reverse order. Don't touch the glass part of your bulb with your bare hands.

Nissan quest headlight bulb replacement guide

Tips
  1. Do not use extreme force to remove light bulb as the glass may break and cause injuries. 
  2. Follow vehicle recommendations on the type of light bulb and wattage to use. 
  3. Use gloves when handling light bulbs. Oil from our hands can be transferred to bulb surfaces.
  4. Carefully dispose old light bulbs. It is recommended to wrap them first in thick paper to prevent injury or cuts in case the glass breaks