Mazda Outer Tie Rod Replacement
Learn how to replace the outer tie rod on a Mazda. Symptoms of worn tie rods and the average cost to change Mazda tie rod.
Most Mazdas including 3, 5, 6, CX5, CX7, CX9 use what is called a steering system knew as rack and pinion. Tie rods are at the end of the steering rack setup and are used to turn the front wheels left and right.🔺
Symptoms of a bad tie rod
Don't ignore replacing the tie rods. If the tie rod breaks while driving you will loose control of the car and end up in an accident.
- Loose steering
- Noise when hitting bumps (Can also be caused by worn sway bar bushings.)
- Shaking in the steering wheel
- Alignment is off
- Car pulls to the side at highway speed
- Uneven tire wear
What you will need
- Mazda Outer Tie Rod
- Buying outer tie rods at the dealership costs around $100 per tie rod, and you will need two. Driver and Passenger Side. If you only want to install genuine Mazda parts buy cheap OEM Mazda tie rods online. Also, a great alternative would be MOOG Mazda Tie Rod set. We have had good experience with Moog, they have lots of positive reviews online and are a lot cheaper than the dealer option.
- Mechanic Tool Set
- You only need a few basic tools for this DIY. 15mm, 17mm, and 19mm open end wrench are the most commonly used tools for this DIY.
- Tie Rod Puller
- A tie rod puller is required to pull the old tie rod out. You may not have this tool if you are doing this job for the first time. A tie rod fork can be used and they are very inexpensive.
- Front Wheel Alignment
- Once you replace the tie rods you will need to get the front end aligned. Note that if you got quotes to replace the tie rods they typically don't include alignment cost. Find a dependable alignment shop in your area. In average you will pay $100 to get the car aligned. Or you can get your car aligned at the Mazda dealership for around $120.
Park your Mazda
Park your Mazda on a flat surface. Place the shifter in park and engage the parking brakes. Always support your Mazda 5 on jackstands.
Loosen the lug nuts
Before you raise the Mazda, you need to brake loose the lug nuts.
Jack Up Your Car
Locate outer tie rod
Locate the out tie rod. Here is a picture of the tie rod on a Mazda 5.
Remove cotter pin and nut
Use a wrench to loosen up the bolt that secures the tie rod. Next, use a marker or chalk to mark the threads on the inner tie rod.
Remove outer tie rod
Remove the cotter pin from the Mazda 5 tie rod. This will allow you remove the castle nut. Use a tie rod puller or separator to disconnect the tie rod from the knuckle.
Install new tie rod
Reinstall new tie rod on your Mazda in reverse order.🔺
Mazda Tie Rod Replacement Cost
The cost to change Mazda tie rods can vary from $200 at independent auto mechanics up to $480 at Mazda dealership. This doesn't include the cost of alignment.
To get the front end aligned you are looking to spend about $100 in average. The diy cost to replace Mazda tie rods is under $100 assuming you have a few basic tools without taking into account the alignment cost.
Cost to change tie rod at Mazda dealer
On Sep. 7th, 2017 we called Fitzgerald Mazda of Annapolis to get a quote to replace both outer tie rods on a 2012 Mazda 3 Sport. We were quoted $600. That price included $120 alignment fee. If you wanted the Mazda dealer to only replace the tire rods but not do alignment you will be looking at $480 for just parts and labor.
Cost to change tie rod at a mechanic
It was difficult to get a quote over the phone from multiple auto repair shops. Several places that we called refused to give us a price over the phone. They wanted us to take the car into the shop and have the mechanic look at it in order to give a price.
Eventually, we were able to get quotes from some independent repair shops. One quote we got on 9/7/2017 was from Desmonds Auto Service located in Maryland. To replace both outer tie rods on a 2012 Mazda 3 Sport was $225 without alignment.
Cost to change tie rod at home🔺
Frequently Asked Questions
How long do Mazda tie rods last?
- In average tie rods last anywhere from 50,000 to 150,000 miles. The exact length depends on your driving habits, roads you drive on and the quality of the tie rod.
What happens when you break a Mazda tie rod?
- If your tie rod breaks while you are driving it will be impossible to steer your car. You will lose control of the vehicle.