How to program Audi garage door opener HomeLink  A1 A3 A4 A5 A6 A7 Q3 Q5 Q7 TT

How to program Audi garage door remote

 HUB: Audi  
Updated Thursday Mar 22, 2018

In this guide, you will find instructions on how to program Audi garage buttons. In fact, Audi allows you to use buttons in the car to open and close your garage door, automatic gate, security systems or even home lighting. These instructions will help owners of Audi A1 A3 A4 A5 A6 A7 Q3 Q5 Q7 TT learn how to program a garage remote. 

The buttons that you need to program are located by the interior light near the rearview mirror. 

Program Audi Garage Door Opener via MMI

This video shows you how to program Audi garage door opener buttons using the Muli Media Interface menu. 

  1. Press the CAR button on the center console. 
  2. Go to Car Systems
  3. Go to Vehicle Settings
  4. Go to Garage Door Opener
  5. Select Program Door Opener
  6. Press the button on the roof that you want to program. The LED light next to the buttons turns on. 
  7. *Go to the front of your Audi and hold your existing garage door opener in front of the Audi logo. 
  8. Press and hold the button of your remote control for 30 seconds.
  9. Your Audi hazard lights blink three times it means programming was carried out successfully. If the turn signals blink only once repeat the procedure. All the steps need to be completed within 5 minutes. 

*If you have no working garage remotes for your garage door, complete steps 1 through 6 then go to your garage door motor press the LEARN button.

Manual Programming of Audi Garage Door Remote

  1. Park your Audi close to the garage. Do not park the car where it can be hit by the garage door or an automatic gate. 
  2. Turn on the ignition. If your Audi has START button, press it without pressing on the brake pedal. All dash lights will be on but do not start the engine. 
  3. Press and hold the button that you want to program for 10 seconds. This is the button by the dome light in your car, not the remote garage door opener. audi home link garage door opener programing
  4. Go to the front of your Audi and hold your existing garage door opener in front of the Audi logo. 
  5. Press and hold the button of your remote control for 30 seconds.
  6. Your Audi hazard lights blink three times it means programming was carried out successfully. If the turn signals blink only once repeat the procedure. All the steps need to be completed within 5 minutes. 

How to erase Audi Garage Door Opener Memory

If you decide to sell your Audi, remember to clear the memory for the garage door opener. 

  1. Press CAR button on the MMI controls
  2. Go to CAR SYSTEMS
  3. Vehicle Settings
  4. Garage Door Opener 
  5. Clear Program Settings
  6. YES

Option 2: Manually clear Audi garage door opener

CLEAR AUDI GARAGE DOOR REMOTE
  1. Press and hold both outer buttons in the headliner for at least 20 seconds. 
  2. Once the small LED light turns off, the button settings have been cleared. 

 

Related Videos

Add new comment

Advertisement