How to Replace BMW Hood Shocks Struts | No Lift Support

Vehicle:   BMW
Difficulty: ⚫⚫⚪⚪⚪
DIY Cost: $10-$30
Est. Time: 20 min

If your BMW hood won't stay up the problem usually is the hood supports. In this guide, you will learn how to replace the BMW hood lift supports yourself.

Symptoms

  • Hood won't stay up
  • My BMW hood drops soon after I open the hood
  • Bonnet won't support itself

Procedure

Follow these instructions to replace the hood support on your BMW.

  1. Pull the hood release under the dashboard twice and open the hood.

    how to fix bmw hood won't stay up

  2. Have a helper keep your BMW hood up as you work to replace the hood supports.

    keep hood open

     

  3. Locate two hydraulic hood supports on your BMW. Most BMW use two hood lift supports.

    bmw hood falls down weak lift support gas 1 3 5 6 x1 x3 x5 x6 series
  4. Use the screwdriver to push away the metal C clip. You don't need to completely remove it. Just push it away from the joint. 

    how to replace bmw hood lift support diy guide
  5. Pull the hood support away from the ball joint.

    remove bmw hood lift from hood

  6. Repeat the procedure on the other end of the hood support.

    bmw hood lift support diy
  7. Grab the new hood support and move the C clip away from its resting place. This will allow you to easily push the new hood lift into the ball joint.

    Hood strut removal/install for replacement/raising hood to service
  8. Install the hood support on one side. Make sure to slide the C clip down to lock it in place.

    Hood Strut Replacement Hood falls on E60 won't stay up
  9. Install the other end of the hood support.

    how you need to replace the hood struts lift on bmw
  10. Repeat the same procedure for the other side of the hood. 

Enjoy a BMW hood that stays up on its own.

BMW hood lift support may also be referred to as hood shock, hood lift, hood spring, gas hood lift or hood damper. Installing new BMW hood lift supports is easy and takes less than twenty minutes.

To fix a BMW hood that won't stay up just replace the hood lift supports. The hood supports on BMW are gas filled and may leak failing to keep the hood in the up/open position. This is a common problem on many BMWs including 1, 3, 5, 6 X1 X3 X5 X6 series.

If the hood falls while you are working on the hood support it can cause serious injuries. The best thing to do is have someone else help keep the hood up.

By YOUCANIC Automotive Experts
Nov 2020
How to Replace BMW Hood Shocks Struts | No Lift Support If your BMW hood won't stay up the problem usually is the hood supports. In this guide, you will learn how to replace the BMW hood lift supports yourself.