How to replace / change alternator
Last Updated on Friday Mar 10, 2017
In this tutorial, you will learn how to change Hyundai Elantra alternator. This applies to model years 2011, 2012, 2013, 2014, 2015, 2016 equipped with the four-cylinder engine. This guide applies to several other Hyundai and Kia models equipped with the 4 cylinder engine such as Hyundai Mistra, Creta, Kia SOul, Forte, Sportage, Optima.
- Hyundai Elantra Alternator
Are looking to save money on the alternator? You can purchase an aftermarket Hyundai Elantra alternator online. Or the OEM Hyundai alternator which we found here Genuine Hyundai 37300-2E200.
How to replace change alternator Hyundai Elantra 2011-16
- Disconnect the negative battery terminal, before you start work on the alternator.
- Disconnect the alternator electrical cables.
Unplug the electrical connector. Press on the tab and pull.
Next, remove the 12 mm bolt that secures the alternator cable.
- Loosen the two alternator bolts. There is a 12 mm and a 14 mm bolt that needs to be removed. Loosen the bolt that tightens the serpentine belt. Now, you can push the alternator down and remove the serpentine belt.
- Remove the alternator. The electrical connector should be disconnected at this point.
- Install the new alternator in reserve order.
- Tighten the alternator bolts to 20 lb-ft. Rember that you need to adjust the alternator so that the serpentine belt is tight before you torque the bolts. The alternator is the mechanism used to tighten the serpentine belt. If you start the car and hear squeaks that means that you didn't tighten the serpentine belt properly and you need to retighten the belt.
We hope that you found this tutorial helpful. If you have any questions please leave a comment below.