On all Chevrolet vehicles 1996 and newer, the OBD2 port is located under the dashboard on the driver's side.
How to Replace Sway Bar Link on a Chevy
In this guide, you will find instructions on how to change sway bar links (also called stabilizer or end links) on Chevrolet vehicles.
- Clunking noise,
- Rattling from the front end,
- Loose suspension,
- Poor handling
What you will need
To change Chevrolet sway bar links, you will need a few basic tools.
Jack up your Chevrolet and make sure to set the parking brake.
- Remove the front wheel. Place a jack stand under the vehicle to support it.
- Locate the sway bar link that you need to replace.
- Remove the nut that secures the sway bar link to the front strut.
- Remove the lower nut that secures the sway bar link to the sway bar.
- Install the new sway bar and torque the nuts according to the manufacturer's specification.
You do not need to carry wheel alignment when you replace only the sway bar links.
Changing the sway bar end links is an easy job that can be completed in less than one hour.
Published on: Monday, April 23, 2018.