How to reset Chrysler Crossfire Service Reminder Reset FSS After Oil Change

reset chrysler crossfire oil service reminder after oil change
Published by YOUCANIC Automotive Experts 
Last Updated May 18, 2018 

Follow these instructions to manually reset the Service Remind (FSS System) on a Chrysler Crossfire 2004, 2005, 2006, 2007,2008. This method will reset the service light. You should perform this reset after an oil change on your Chrysler Crossfire.

Resetting Service Reminder FSS - Chrysler Crossfire

  1. Turn key to ON/ RUN position.

  2. Within one second press the knob/button twice.

  3. The present status for days or distance is displayed. Within 10 seconds turn the key to OFF / LOCK.

  4. Press and hold the knob/button, while turning the key to ON/RUN again. The present status for days or distance is displayed once more. Continue to hold the knob/button.

  5. After approximately 10 seconds, a signal sounds and the display shows 10,000 miles.

  6. Release the knob/button.

That is the procedure on how to reset oil service light Chrysler Crossfire.