My Cheviot 02 trailblazer V6 automatic battery is being drained by the fuse #24 IPC/DIC
Carly for BMW Installation Instructions DIY Guide
Carly for BMW is one of the most popular scanners used to read, clear codes, diagnose problems and code BMW cars. In this guide, we will show you how to use Carly for BMW.
Where to buy Carly for BMW
Instructions on how to use Carly for BMW
Locate OBD2 port under the dash.
Plug Carly for BMW into the OBD2 port.
Turn ignition On
Make sure Carly for BMW is powered on. The LED light should be on.
Pair your phone with the Carly for BMW.
Go to Setting > Connections / Bluetooth / Wireless > Choose Bluetooth > Turn on Bluetooth > Search Devices > Select Carly for BMW > Enter 1234 pairing code.
Download Carly for BMW from the Play Store. The Lite version is very limited in functionality. In this case, we download and install the Pro version.
Open Carly for BMW. Select connections at the bottom. Select Bluetooth.
Make sure to select your BMW chassis as well. Left bottom corner. In this case, we have an E60 5-Series.
Go back to the Carly home screen (also called Dashboard)
Perform a full system scan.
Review and clear codes.
Carly for BMW is very powerfully and allows you to code your car. Be careful with coding your BMW. If you are not sure what you are doing, you may cause problems such as damaging control units or misconfiguring them.
I have a 2006 Pontiac Grand Prix 3.8L. I have a code of P0300. But i didn't have any other codes to show up.
Merc A150 elegance!
It's automatic but no drive got a total of 8 fault codes
All power train related
The worst are -
I am ordering the connector adaptor and O rings to change on E430. The car went into Limp mode.