My Cheviot 02 trailblazer V6 automatic battery is being drained by the fuse #24 IPC/DIC
Check or Add Power Steering Fluid
Learn how to check and add Power Steering Fluid applicable to 2015-2018 Kia Sedona. Checking the power steering fluid on a Kia Sedona is easy and takes less than five minutes.
DIY video instructions on how to Check or Add Power Steering Fluid on Kia Sedona model years 2015, 2016, 2017, 2018 Chassis trim: SedonaSedona years:2015, 2016, 2017, 2018
What you will need:
How to check power steering fluid 15-18 Kia Sedona
Step 1: Open hood
Locate the hood release underneath the dash. Pull the lever until you hear the hood pop open. Next, you need to release the hood safety latch at the front of the hood.
Step 2: Locate power steering pump
Next, you need to locate the power steering pump on your Kia Sedona In this case, the power steering pump is located on the driver/passenger side of the engine bay.
Step 3: Remove power steering cap
Once you locate the power steering reservoir on your Kia Sedona, remove the cap. Inspect current condition of the the power steering pump.
Step 4: Determine Low and High marks
If you look carefully on the side of the power steering fluid or the cap dipstick you will notice a Low and Max level for the power steering fluid. Determine if the current power steering level is below the minimum level.
Step 5: Add power steering fluid
Adding power steering fluid on 2015-2018 Kia Sedona is very easy. Here are some general instructions on how to add power steering fluid on a car. Instructions on how to add power steering fluid on a car.
I have a 2006 Pontiac Grand Prix 3.8L. I have a code of P0300. But i didn't have any other codes to show up.
Merc A150 elegance!
It's automatic but no drive got a total of 8 fault codes
All power train related
The worst are -
I am ordering the connector adaptor and O rings to change on E430. The car went into Limp mode.