Mitsubishi Mirage Rear Turn Signal Replacement Guide

DIY Cost: $ 10 - 15
Est. Time: 15 - 20 mins
Difficulty: Very Easy
This guide provides step-by-step instructions on how to replace the rear turn signal light bulbs on a Mitsubishi Mirage G4. 

What you will need

Procedure

  1. Open the trunk of your car by pulling the trunk release under the driver's seat.Trunk release on the Mitsubishi Mirage.

     

  2. Remove the tail light. Remove the screws of the tail light, use a screwdriver to remove the screws.Screws on the tail lights.Then unlock the clips of the tail light using a prying tool and pull out the tail light.Remove the tail light of the Mitsubishi Mirage G4.

     

  3. Remove the sockets out of the rear turn signal light assembley. Rear turn signal light bulb of the Mitsubishi Mirage.To remove the connectors, twist the connector counterclockwise to unlock it from the tail light then pull it out once the connector is unlocked.Removing the rear turn light bulb connector on the tail light.

     

  4. Remove and replace the rear turn signal light bulb. To remove the light bulb, push the bulb in and twist it counterclockwise to unlock the bulb from the connector. Then, to put the new one, push it in then twist it clockwise to lock the light bulb on the connector.Remove and replace the rear turn light bulb.

     

  5. Attach the connector to the tail light by twisting the connector clockwise into the tail light.Reinstalling the rear turn light bulb to the tail light.

     

  6. Reinstall the tail light. Align the clips of the tail light to the clips on the vehicle then push the tail light in and make sure that all the sides of the tail light are locked in. Then put the screws back in to fully seal the tail light in.Reinstalling the tail light of the vehicle.Reinstalling the tail light of the vehicle.Reinstalling the tail light of the vehicle.Reinstalling the tail light of the vehicle.

     

  7. Close the trunk and check that the rear turn signal lights turn on.Close trunk of the Mitsubishi Mirage.


Was this helpful?
We would love to hear from you. Send us tips on how to improve this article.
Send us message if you have any car questions.

Tip!
Check out more guides for the following vehicle.

Comments

Mitsubishi Mirage Rear Turn Signal Replacement Guide What you will need Rear turn signal light bulb Screwdriver Prying tool Procedure Open the trunk of your car by pulling the trunk release under the driver's seat.