Clock Spring Spiral Cable Angle Sensor Replacement Nissan Vehicles

Clock Spring Spiral Cable Angle Sensor Replacement Nissan Vehicles

 HUB: Nissan, 2011-2017  
Updated Friday May 18, 2018

In this guide, you will learn how to remove the clock spring (spiral cable) and steering angle sensor on Nissan vehicles. Typical cost to replace Nissan clock spring ranges between $350-$700 at the dealer or auto repair shop. DIY cost ranges from $50 to $150. We recorded this video series on a 2017 Nissan Quest but these instruction are similar to Nissan Maxima, Altima, Murano, Titan, Qashqai, Navara, Pathfinder, Sentra and Rouge. 

Symptoms

It is not uncommon for Nissan clock spring to fail to cause various problems. Some of the most common Nissan clock spring problems include. 

  • Nissan Airbag Light On,
  • Horn Does Not Work,
  • Nissan Steering Wheel Buttons don't work,
  • SRS Fault Code: Driver squib circuit open or high resistance
  • Typical Codes:  Code B1049 and B1054 

What you will need

Instructions

Step 1

Park your Nissan and set the parking brake. Remove the key from ignition.

How to replace clock spring on Nissan ALLMO 2003 2004 20005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017

Step 2

Disconnect the negative battery cable from the battery terminal.

Step 3

Remove torx bolts on the side of the steering wheel. Once the bolts are loose or removed the airbag can be removed.

Instructions on how to change Nissan ALLMO spiral ribbon cable

You will need to use secure torx bit with a hole in the center.

Unplug the wires from the back of the driver's airbag.

Watch video on how to remove Nissan airbag.

Step 4

Remove the center bolt that secures Nissan steering wheel to the steering column. Mark the steering wheel and column before you remove the steering wheel.

Remove steering wheel and spiral calbe on Nissan Qashaqi Note Versa Rouge Tiida D40 Titan Micra Almera Primera Altima Maxima Murano

Unplug steering wheel button wire harness.

Watch video on how to remove Nissan steering wheel.

Step 5

Remove the plastic trim.

Clock spring problem causing Nissan airbag light light to come on

Watch video on how to perform this step.

Step 6

Next, you need to remove the clock spring which is held in place with several screws.

Replace the clock spring if your Nissan horn does not work

Unplug the wires from the clock spring.

In this case the clock spring and Nissan steering angle sensor are integrated together.

Install new Nissan spiral cable/clock spring. The clock spring needs to be installed in neutral position. Don't wind up the clockspring to the left or right. Clock spring has a limited number of turns. If you turn it all the way to one side, the ribbon can't take more steering wheel turns. This is a common mistake a casues the clcok spring to fail shortly after installation.

Step 7

Watch video on how to install Nissan clock spring / spiral cable / steering angle sensor.

Nissan spiral cable replacement diy

Install Nissan steering column cover.

Step 8

Install the steering wheel and torque the center bolt to 30-35Nm.

Step 9

Install the steering sheel and torque the center bolt.

Step 10

Install the airbag. Connect the steering wheel button and airbag wires. Torque the bolts that secure the airbag to the steering at 10Nm.

NOTES

Warnings

  • Do not use test equipment such as multimeters to check SRS circuits unless directed by the Shop Repair Manual. Doing so can deploy airbags.
  • Always turn ignition switch OFF, disconnect the battery negative terminal and wait at least 3 minutes before you start working on the airbag system.
  • Handle airbag module carefully. Place airbag with the pad side facing upward and always stay two feet away from the airbag.
  • When installing a clock spring (spiral cable) it needs to be the neutral position since its rotations are limited. 
  • Don't rotate the clock spring after you remove the steering wheel. If the ABS or Traction Control Light turn on, you may need to reset the steering angle sensor using a Steering Angle Sensor Reset Tool.
  • Rember to read fault codes from the SRS control unit and clear codes after replacing airbag components. You may need a Level 2 OBD2 Scanner to clear airbag codes. 

Nissan Clock Spring Part Numbers

This is an incomplete list of Nissan clock spring part numbers. The best way to get the correct clock spring part number for your Nissan, is to call any Nissan dealer and provide the VIN number. 

  • OEM Number: 25567-ET025
    • -Versa Models 2007-2012
    • -350Z Models 2007-2009
    • -370Z All Models 2009
    • -Murano Models 2006
  • 25540CB62E // 479453X10A
    • Nissan Frontier 2.5L Automatic S     2011, 2012, 2013, 2014
    • Nissan Frontier 2.5L Automatic SE     2009, 2010
    • Nissan Frontier 2.5L Automatic SV     2011, 2012, 2013, 2014
    • Nissan Frontier 2.5L Automatic XE     2009, 2010
    • Nissan Frontier 2.5L M/T S     2011, 2012, 2013, 2014
    • Nissan Frontier 2.5L M/T SE     2009, 2010
    • Nissan Frontier 2.5L M/T SV     2011, 2012, 2013, 2014
    • Nissan Frontier 2.5L M/T XE     2009, 2010
    • Nissan Frontier 4.0L V6 Automatic Desert Runner     2013, 2014
    • Nissan Frontier 4.0L V6 Automatic S     2011, 2012, 2013, 2014
    • Nissan Frontier 4.0L V6 Automatic SE     2009, 2010
    • Nissan Frontier 4.0L V6 Automatic SL     2014
    • Nissan Frontier 4.0L V6 Automatic SV     2011, 2012, 2013, 2014
    • Nissan Frontier 4.0L V6 M/T S     2011, 2012, 2013, 2014
    • Nissan Frontier 4.0L V6 M/T SE     2009, 2010
    • Nissan Frontier 4.0L V6 M/T SV     2011, 2012, 2013, 2014
    • Nissan Murano 3.5L V6 Automatic CVT S     2006, 2007
    • Nissan Pathfinder 4.0L V6 Automatic S     2008, 2009, 2010, 2011, 2012
    • Nissan Quest 3.5L V6 Automatic Base     2006, 2007, 2008, 2009
    • Nissan Quest 3.5L V6 Automatic S     2006, 2007, 2008, 2009
    • Nissan Quest 3.5L V6 Automatic SL     2006, 2007, 2008
    • Nissan Sentra 2.0L Automatic CVT Base     2007, 2008, 2009, 2010, 2011, 2012
    • Nissan Sentra 2.0L Automatic CVT S     2007, 2008, 2009, 2010, 2011, 2012
    • Nissan Sentra 2.0L Automatic CVT SL     2007, 2008, 2009
    • Nissan Sentra 2.0L M/T Base     2007, 2010, 2011, 2012
    • Nissan Sentra 2.0L M/T S     2007, 2008, 2009
    • Nissan Titan 5.6L FLEX V8 Automatic SE     2006, 2007
    • Nissan Titan 5.6L FLEX V8 Automatic XE     2006, 2007
    • Nissan Titan 5.6L V8 Automatic SE     2006, 2007
    • Nissan Titan 5.6L V8 Automatic XE     2006, 2007
    • Nissan Xterra 4.0L V6 Automatic S     2007, 2008, 2009, 2011, 2012, 2013, 2014
    • Nissan Xterra 4.0L V6 Automatic X     2007, 2008, 2010, 2011, 2012, 2013, 2014
    • Nissan Xterra 4.0L V6 M/T S     2007, 2008, 2009, 2011, 2012, 2013, 2014
    • Nissan Xterra 4.0L V6 M/T X     2007, 2008, 2010
  • PART# 25554-9N09A INTERCHANGE PART# 25554-9N00A, 25554-9DA5A

    • 2009-2014 Nissan Maxima

  • OE# 25567-EB301 , 25567EB301 ,25567-1DA0A ,255671DA0A

    • Nissan Pathfinder 2.5 dCi 2005/01-2013/11 YD25DDTI
    • Nissan Pathfinder 4.0 L 2005/06-2013/11 VQ40DE
    • Nissan Navara D40 2005 - 2013
       
  • OE# Number: 25567-EB301 , 25567EB301 ,25567-1DA0A ,255671DA0A
    • Nissan Pathfinder 2.5 dCi 2005/01-2013/11 YD25DDTI
    • Nissan Pathfinder 4.0 L 2005/06-2013/11 VQ40DE
    • Nissan Navara D40 2005 - 2013
  • OEM Number: B5567-JG49D , B5567JG49D
    • Nissan Tiida 2007-2017

 

Add new comment