My vehicle keeps applying brakes on its own. Also the power steering is hard sometimes. The ABS light and EPS warning light is on. Anyone know the fix for this problems?

Comments

Yes I scanned it with a Maxisys Elite

1. EZS-Electronic Ignition Switch Fault/1

903E Stored Terminal 30b: Not present/Undervoltage Supply (Storage Battery)

2. SAM-F-Signal acquisition and actuation model front Fault/2

9061 Stored component'G1/7 (Auxiliary battery)' is faulty or the wire has an open circuit

3. Rear SAM-Rear Signal acquisition and actuation module Fault/1

9137 stored component'E4e9 (Right stop lamp, tail lamp, parking lamp and side marker lamp)' or the wire to the component has an open or a short circuit to battery.

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.