Can a headlight assembly from a 2014 Tucson be installed in a 2012

Comments

Can it be installed? Yes. Physically they are the same shape. If you look carefully the 2014 and newer models have a different lens and projector shape. 

You will be fine if you are replacing both. Just make sure you don't switch between halogen and HID as that will complecate this plus for HID you need a ballast as well. 

That's the reason I asked the question cause I think the projector lens look better.. thanks for the input..

yes, it would be fine. all you need to do is first make sure that the dimensions should be the same as most of the designs vary a little bit. all you need to do is measure it and make proper adjustment as per the requirement so that it completely matches the car design. otherwise what i have generally observed is that people try to change it without making proper adjustments and due to which it doesn't look good

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.