Conductor Plate Fault (High RPM engine but car doenst move )

E1962 Plausibility error between the selector lever position of component A80 (Inteligent servomodule for DIRECT SELECT) and of control unit Y3/8n4 (Fullyintegrated transmission control(VGS)control unit)

This fault know repair conductor plate ? or need new buy?

Comments

user profile image
MercedesMedic made a comment.
1 year ago

First I would check the 13 pin connector for oil. If that has no oil then my guess is that it is a bad conductor plate. You can clean it but there is no guarantee that it will work. If it was me I would get a new one. They are cheap enough nowadays.

 
user profile image
Jonathan1766 made a comment.
1 year ago

I checked the connector, cleaned the valve body I put new oil. But nothing the same problem. Diagnostics shows turbine sensor data that can be measured by a sensor at a level.is it possible to fix conductor plate? where can I buy a new Conductor plate?

 
user profile image
MercedesMedic made a comment.
1 year ago

There are repair shops that can fix them. Considering that a new conductor plate runs around $100 it makes sense to just install a new one. Check eBay and Amazon.

 

Add new comment

The content of this field is kept private and will not be shown publicly.