Hi, I have a Steering Wheel Module from a 2011 Ford Focus and I need to access the data from the Steering Angle Sensor. I have already got as far as connecting to the LIN bus for the stalks and that works fine, but I also need to get steering angle data.

I beleive this data is available on a CAN bus on that module, but I can't find any info about what pins I need to tap into on the SAS connector (I don't have the original harness from the car that the module came from).

Can anybody help out with a pinout for the SAS module?

Thanks.

Doug.

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.