i have a mercedes c320 and it runs fine for about twenty mins then it cuts off and wont crank for about twenty mins. ive replaced the mass air flow sensor fuel filter and catalytic converters...someone plz help...


Is the check engine light on? It is possible that the crankshaft position sensor is not working properly. I would recommend that you use a obd2 scanner to read the trouble codes from the ECU.

well i know its got something to do with the fuel cause i can pour gas into the intake and it runs fine until it burns it off
... its funny cause if i let it sit for twenty mins it will crank back up and run for twenty min

Sounds like there is an issue with the fuel pump. I would get a pressure gauge and connect it to the fuel rail to get a pressure. It's a very easy procedure and takes only 5 min. Check it when the car is refusing to start. I suspect the brushes for the fuel pump in the gas tank are on their way out. That's why you only see the problem at random. To replace the fuel pump you will need to remove the rear seat. It's not that hard but you need the right tool to remove the larg o-ring on top of the fuel pump.

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.