Level calibration mercedes Benz w220

Thanks first for your precious advice, i am a new member and sorry for my english, french is my langage

i have a problem with level calibration on my S350 2003 after replacing all struts and airmatic compressor 

When i put the car at desired level, level sensor voltage are out of range then calibration can not be done 

could you mind help me fix It 

iam using a maxidas 808

thanks in advance for your response 

regards

Comments

user profile image
Sthong1221984 made a comment.
5 months 2 weeks ago

Kindly check this link https://www.youcanic.com/u/mercedesmedic/mercedes-suspension-ride-height-level-sensor.

Hope will help you to check the level sensor.

 
user profile image
abusufyan made a comment.
5 months 2 weeks ago

Does your air compressor releases air when you park your vehicle?

 
user profile image
abdel-karimsahly made a comment.
5 months 2 weeks ago

Sthong 

page not found

 

Abusufyan

no releases 

It’s stays at its position

 

 
user profile image
Sthong1221984 made a comment.
5 months 2 weeks ago

Kindly check the level sensor mounting plate or the linkage and wiring. Maybe the mechanic accidentally bent the linkage during replacing your strut causing the level sensor malfunction.

 
user profile image
abusufyan made a comment.
5 months 2 weeks ago

Have you figured out the problem yet? If not, maybe you want to read the check engine codes and post them here

 
user profile image
MBFanatic made a comment.
5 months 2 weeks ago

I have had this problem before. One of the struts is too high. You can meausure the hight of the car at each corner and lower the vehicle at that corner with your scanner.

Another option is to park the vehicle on an incline and carry the calibration. Driveway/hill for example that is slopped down (up) will work. Park facing uphill first. If that doesn't work, try calibration with the car facing downhill. This is a quick and dirty trick to carry out calibration.

 
user profile image
MBFanatic made a comment.
5 months 2 weeks ago

Also on the first link remove the dot at the end or search the link on Google. It works.

 
user profile image
abusufyan made a comment.
5 months 2 weeks ago

I know it has been a while, but were you able to find a solution to this?

 
user profile image
abusufyan made a comment.
5 months 1 week ago

Hi dear! Did you get a chance to figure out this problem?

 

Add new comment

The content of this field is kept private and will not be shown publicly.