Level sensor does not seem to be working after I changed the upper control arms. Any suggestions. Car is not lifting all the way. Sags on one side.

Comments

Could be a number of things. When u changed the upper a arm and you bolted the level sensor back to wishbone some have a couple hole around the same spot you are supposed to bolt the level sensor to. The one you should use is the hole closest to you when you are looking at it  if you set it to the furthest back it when read incorrectly and cause the sagging. Also maybe air leak in strut or just need level recalibrated using Star diagnostic scanner 

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.