I bought this car already in limp mode . I scanned with my scanner, and got the code 0715 . So i put the car up on my ramps, and jackstands, popped the tranny pan drain bolt and let it drain overnight . Following day,  i dropped pan, unplugged the 13 pin connector, dropped the valve body and replaced the conductor plate . Still in limp mode . Had battery disconnected while doing all of this . Anything else ? I like this car, but im already fed up . Replaced fluid and filter as well .


Now you need a scanner that can erase codes from the transmission control unit so you can reset the TCU. On your car it has to be done via the 38 pin connector under the hood. 

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.