I had a garage change my break lines that were rusty. After the break line change, the car shows three errors: ABS error, ESP error and Service Break error. The fault code showing is C242F Rear Wheel speed sensor right, Test Wiring Plug Connection. What does the error code imply? Also, the car cleared the error code itself yesterday, it was gone this morning, only to come back in the evening. I can reset the error code and it will stay off for a while only to return, but with no apparent trigger. In other words, it comes back without anything evident that would trigger it, and in different times and distances. The breaks are just fine, but I can feel (it may be my imagination) that the suspension is more stiff. Cheers



Check the wheel speed sensor as it may have goten dirty during the job. Or the wire could have been damaged. As the code descprition says check the rear right sensor. Remove it and check it for debries. Also check the wires and espeically where it connects to the frame.

Check out this guide: http://www.mercedesmedic.com/how-to-replace-front-abs-wheel-sensor-e-clk-cls-class/

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.