Took blower motor off to be repaired, put it back in and stays on all the time without even key in ignition, should supply be live all the time any help appreciated 



Were there any other wires going to the blower other the supply lines? What I am trying to figgure out if the regulator is integrated on the blower or not. That would noramlly be the culprit and either prevent it the blower from working or keep it on all the time.
Yes there’s 2 other wires as well which all go to the regulator, but guy at merc said it should all cut off with ignition
I missed the fact that it stays on even with ignition off. If that is the case the most liklely problem is a bad relay (stuck on) or a defective sam module. Have you checked the relay? Also do you have any other electrical issues that you can't explain?

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.