I currently have a 2016 2500 Sprinter with the 2.1 liter OM 651 engine.  I am trying to install the Frantz oil filter system to the engine but I cannot find a picture or location where I can tap into a high pressure oil line from the engine, oil pressure sending unit or pressure sensor, and then where to plumb in the return line from the bypass filter system back to the engine.  I do not want to tap into the oil pan with a fitting. 

Any pictures or suggestions would be a great help!!  Thanks. 



Oil pressure sensor should be located just below oil cooler, next to oil filter housing. 

Front side of the engine. 




Thank you. I will take a look at this area and see if I can find a location where I can get what I need. 


Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.