My husband recently replaced rack and pinion, now our horn and other controls on steering wheel will not work also airbag and track control/stabilizer lights on. If he did not line up rack to steer column perfectly will it cause this problem and can he redo the process to correct or just go ahead and replace the clockspring? If he created the issue is it really a bad clock spring or just a bad connection angle?

Comments

Horn and the steering wheel buttons should work regardless. The fact that they do not work it is an indication that the clock Spring is damaged and needs to be replaced. Unless he forgot to connect it. 

Have you figured out the problem yet? If not, maybe you want to read the check engine codes and post them here.  

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.