My air bag  cam on  in the dash bord  and jeep beeping for seevice so how do i check it or reset the srs and where is it located 


First you need to figure out why the airbag/srs light is on. The best way to find out is to use an airbag scanner and read the codes via the diagnostic port under the dashboard.

If there are stored codes, they can be cleared. Such as low battery voltage to the SRS module.

If the codes are present, they need to be addressed. Fixed. Common issue include passenger seat mat or defective clock spring. If you get a fault code for driver airbag resistance to high, most likely it is the clock spring. You fix the issue then clear the code.

Hope this helps. Let us know what you find out.

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.