I am looking for a scanner for my 2017 Sprinter that will allow me to program for modules like the Mid City Engineering Sprinter Smart Idle (https://www.midcityengineering.com/product/sprinter-smart-idle/) which says it needs the following steps 

1. With SDS  - Select Control Unit "Combustion Engine OM 651" 2. Select "Control Unit Adaptations" 3. Select "Coding" 4. Select "SCN Coding" 5. Run the Procedure 6. After the Procedure is finished Select "Display Coding Data" 7. For Verification of Completion  - Under "Working Speed Control" it should read "Active"

Will the Autel DS708 or DS808 perform those steps or is some other scanner required?

Thanks,

Tom

Comments

I have used Autel DS708 It allows you to perform some coding and programing. Nothing comes close to Star Diagnostics scanner though. As far as the scanner you mention, I have not used it so can't really compare it to the others.

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.
The content of this field is kept private and will not be shown publicly.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.