How to Release Pressure from Chrysler Crossfire Convertible

DIY Cost: $0
Est. Time: 10 min
Difficulty: Easy
This article will provide procedures on how to release pressure from Chrysler Crossfire Convertible.

If your convertible top on your Chrysler doesn't fully open or close, it will get locked in place.

Under such conditions, you can not manually close the top. You also can not open the trunk as it will be locked as well.

To fix this problem you need to release the pressure from the convertible top system. Follow these instructions to release pressure from convertible top hydraulic lines.

Procedure

  1. Turn ignition on but do not start the engine.
  2. Press down the convertible top button.
  3. Continue keeping the button down.
  4. Turn off the ignition while holding down the switch.
  5. Wait for five seconds after you turn off the ignition. During this time you need to be holding the convertible top switch down.
  6. Pressure has been released from the convertible top system.

 


Was this helpful?
We would love to hear from you. Send us tips on how to improve this article.
Send us message if you have any car questions.

Tip!
Check out more guides for the following vehicle.
How to Release Pressure from Chrysler Crossfire Convertible If your convertible top on your Chrysler doesn't fully open or close, it will get locked in place. Under such conditions, you can not manually close the top. You also can not open the trunk as it will be locked as well.