Skip to main content

How to Replace Oxygen O2 Sensor on Kia Optima 2016-2020

DIY Cost: $ 20 - 60
Est. Time: 20 - 35 mins
Difficulty: Intermediate

Summary

Step-by-step instructions on how to replace the O2 sensor on a 2016-2020 Kia Optima.

In this tutorial, you will learn how to replace the oxygen sensor (O2) on a Kia Optima. This guide provides instructions on how to replace both the upstream (Bank 1 Sensor 1) and downstream (Bank 1 Sensorsensor (O2) on a Kia Optima. This guide provides instructions on how to replace both the upstream (Bank 1 Sensor 1) and downstream (Bank 1 Sensor 2). 

What you will need

Procedure

  1. Open the hood, pull the hood release under the dashboard and go in front of the vehicle.Hood release of 2016-2020 Kia Optima.Then unlock the hood latch and pull the hood up.Opening the hood of the 2016-2020 Kia Optima.

     

  2. Locate the O2 sensor (Bank 1 Sensor 1) at the top of the exhaust manifold.The O2 sensor on the top.

     

  3. Remove the O2 sensor on the top by using a socket designed to loosen the O2 sensor.The socket to remove the O2 sensor.

     

  4. Follow the cable of the O2 sensor above and disconnect the clip by pushing it and pulling it out.The electrical connectors of the O2 sensor.

     

  5. To locate the lower O2 sensor (Bank 1 Sensor 2), Jack up the vehicle and support the vehicle with jack stands.Jacking up the Kia Optima 2016-2020.

     

  6. Go under the vehicle and locate the O2 sensor behind the engine.The O2 sensor below the engine.

     

  7. Remove it using a wrench, follow the cable and disconnect the connector.Removing the electrical connector of the O2 sensor below.

It is not necessary to replace both oxygen sensors at the same time. While replacing both sensors at the same time is recommended, replacing only the faulty O2 sensor is acceptable. 

Notes

How to Replace Oxygen O2 Sensor on Kia Optima 2016-2020 In this tutorial, you will learn how to replace the oxygen sensor (O2) on a Kia Optima. This guide provides instructions on how to replace both the upstream (Bank 1 Sensor 1) and downstream (Bank 1 Sensorsensor (O2) on a Kia Optima.